dorianwoolger
Member Since: 11 May 2018
Location: Tangmere
Posts: 223
Hi everyone
Looking for ideas on how to protect the final part of exposed winch rope from UV.
Either a storage sleeve or alternative storage method.
Dorian Woolger
Amateur Call: 2E0FSI
2016 Discovery 4 Graphite
+ Remote for FBH, + Timed Climate, + Cubby Fridge, + ARB Compressor + Roof Ladder
RLD Spare Wheel Protector
Altox WBUS-5 GPS FBH Controller.
RLD Hidden winch mount + Superwinch Talon 9.5SR
ProSpeed Rack
ProSpeed Sliders
Tuff Trek RTT
EVOcorse 18" Wheels with 265/60 R18 KO2's
13th Apr 2020 11:18 pm
lloydey64
Member Since: 30 Sep 2018
Location: worcester
Posts: 11
would heat shrink tube work it is available in large diameter sizes
14th Apr 2020 7:04 am
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4314
Tubular 1” webbing about a metre long.
Need to unwind the rope and undo terminal holding end of rope onto drum and thread it along length of rope.
Can also be used as rub point protector if need me, best to avoid Rub point if at all possible.
If you struggle to find some give me a shout as I might have some in store room.
Edited to add, just needs a bit of care feeding it through hawser to stop it bunching up as feed last metre back onto drum
Brendan
14th Apr 2020 7:37 am