Kelv
Member Since: 17 Feb 2020
Location: Chard Somerset
Posts: 5
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Manual Indus Silver 2005 Discovery 3 TDV6 HSE Manual Indus Silver](../images/veh/indus_silver.gif)
|
Discovery 3 rear diff ....held on by three mounts ...two at the rear cross Member and one at the front ..all in rubber mounts ....question ..is there a reason the two rear bolts wind off about 15mms and stop fast....impact gun set on "beat it to death setting" won't budge it....both sides do the exact same ....Anyone come across this ....id love to know before I get a saw to it ....
|
22nd May 2020 12:32 am |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Zambezi Silver 2005 Discovery 3 TDV6 SE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Could it be rust on on the ends of the threads?
|
22nd May 2020 6:19 am |
|
|
Wyn
Member Since: 15 Jun 2015
Location: Cardiff
Posts: 56
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 Commercial XS Manual Stornoway Grey 2007 Discovery 3 TDV6 Commercial XS Manual Stornoway Grey](../images/veh/stornoway_grey.gif)
|
When i changed my rear diff, i had to work those bolts for about 15 mins each.....loosen /tighten with plenty of spray lube and an impact gun (3/4 drive millwaukee).
|
22nd May 2020 4:03 pm |
|
|
Kelv
Member Since: 17 Feb 2020
Location: Chard Somerset
Posts: 5
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Manual Indus Silver 2005 Discovery 3 TDV6 HSE Manual Indus Silver](../images/veh/indus_silver.gif)
|
It's the nuts ...Nylox they hold on so good ...I used a electric file to take the end off and the heat generated by that caused the nut to let go ....
|
27th May 2020 9:46 pm |
|
|