Member Since: 23 Dec 2019
Location: Lincolnshire
Posts: 28
Won’t inject!! (Does now) trigger wheel out 2-3 degrees
Hi, I have a 2.7 tdv6 that won’t start, borrowed snap on code reader only fault is egr but that’s blanked so don’t see how that can be related,
Iv had a injector put externally plugged in with fuel supply and there’s nothing so clearly won’t start, I have 48,000+- from the hpp and fuel is being delivered to the rails but the Injector isn’t firing,
Full story is got a low mileage tdv6 fitted new crank it snapped, that engines ducked bough another with “fueling” problems, came bare fitted my injectors and hpp which worked prior to the low mileage engine going bang,
Same loom same injectors same pump..
No fuel errors
Only egr error
Any help appreciated because I’m stumped at the moment
Last edited by Sean007 on 28th Mar 2020 7:33 pm. Edited 2 times in total
21st Mar 2020 1:49 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Crank sensor seeing anything?
21st Mar 2020 2:15 pm
Sean007
Member Since: 23 Dec 2019
Location: Lincolnshire
Posts: 28
Getting 157rpm, so I guess I had though of this but I get no cam sensor errors etc, and a rpm reading
21st Mar 2020 2:27 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Immobiliser somehow locked in?
Any codes?
21st Mar 2020 4:07 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
Any fuel at the shrader valve.
22nd Mar 2020 9:47 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1815
If there is a history of fuelling problems on an engine... and you rebuild such a engine/use it as a basis, I would always change the trigger wheel and crank sensor... in the first place..
Since you did use the proven top-end parts allready, I can only think of the bottom parts as first suspects...
Just having a RPM readout may be not enough... says nothing about correct timing..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
22nd Mar 2020 10:53 am
Rmacaul
Member Since: 05 Apr 2017
Location: Angus
Posts: 136
I have run mine out of fuel twice now ( fuel gauge problems) but I have found I have to reset the low pressure fuel pump with code reader as it goes in a protection mode.
Does nor show as a fault so might be worth a look.
22nd Mar 2020 11:44 am
Sean007
Member Since: 23 Dec 2019
Location: Lincolnshire
Posts: 28
Small update, it is now injecting fuel but will not fire up, turns out my brother only tightened the rail pipes up by hand and I was loosing pressure which is why it wouldn’t inject, my own fault for not double checking,
It’s now trying to start but won’t so going to pull the engine out again and replace the rear trigger wheel, sounds as if it’s injecting at the wrong time, the timing is 100% correct all the pins etc go into place only other thing is if the lobes have spun on the cam but I imagine it would make nasty noises if that was the case.
Starting to get really annoyed with it now
22nd Mar 2020 10:14 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
These don’t like to start in a hurry.
I would keep trying a little longer.
22nd Mar 2020 10:52 pm
Sean007
Member Since: 23 Dec 2019
Location: Lincolnshire
Posts: 28
So took the plunge and removed engine for the 1000th time and the trigger wheel was 2-3 degrees out so I’m guessing that’s where my problem is.. will find out tomorrow I’ve added a photo bare in mind the locating pin on the tool is tapered
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum