Chips1973
Member Since: 17 Dec 2011
Location: Shropshire
Posts: 53
  
|
I am going to change the gearbox oil and filter on my Discovery 5 and just gearbox oil on my discovery 3, the problem I have is I don't have a diognostic tool and you need to know the oil temp to get the correct levels and insure the oil cooler is primed. Is there a cheap diognostic tool that can do this or is there a way to read temp with out one. I do have a thermometer with a probe on a length of wire, I could put this in through the fill port but I know this will let oil out and be messy.
I know some diognostic tools won't work on my disoc 5 as the local Halfords couldn't code a new battery with their tool and had to send me to another branch with a better tool and thus I'm seeking advice before spending any money.
Thanks in advance for any help
|
 24th Nov 2024 10:29 pm |
|
|
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2326
|
Autel AP-200 is the one for You  - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
|
| 25th Nov 2024 11:19 am |
|
|
Chips1973
Member Since: 17 Dec 2011
Location: Shropshire
Posts: 53
|
Thanks , I have just ordered one 
|
| 26th Nov 2024 8:40 pm |
|
|
