Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Pressure does not decrease when venting gallery
Post Reply  Down to end
Page 1 of 1
justmark
 


Member Since: 08 Jun 2021
Location: Derbyshire
Posts: 32

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3
Pressure does not decrease when venting gallery

I have had this issue and fault code C1 A13 64 for a while but believe that I have cracked it.
After trying several remedies I purchased a replacement inlet/exhaust silencer from LR part no LR018300, it cost £60.00 inc. It was a pig to replace getting the pipes routed through the anti roll bar and around the chassis but finally did it. The fault has not returned and we have just come back from a 2000 mile adventure up the west coast of Scotland towing our caravan with the car fully loaded and without any issues.
I have since cut open the old silencer and guess what, the 2 no sponge filters were full of white dust! the same dust removed from the 3 no valve units which were refurbished using a kit from 4x4 Airseals, which cured the suspension sinking over night issues. The air dryer has also been refurbished and the crystals replaced.
Hopefully this might help others with the same problem.
Attached a few photos to show the findings.
  
Post #233901610th Jun 2023 11:49 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site