looneyfitter
Member Since: 15 May 2012
Location: liverpool
Posts: 120
|
So this weekend im planning on lifting the body off as have no compression on no.3 ns head.
Plan is to pull the head off to take a look. Suspect the valve bent when the sequencer snapped. Car started once replaced but what other damage is likely ro have been caused?
Also what else should I do whilst the body is off? Thinking of below list,
Have the injectors cleaned, valve stem.seals on all valves
Replace the offside head gasket.
(where should i but the parts from?
Its a 2.7 tdv6 cheers
|
2nd May 2022 7:58 pm |
|
|