Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4314
Dan_W a batwing or foxwing can be adjusted for front to back movement. One of the tubular ribs goes across the back of the vehicle. Our D4 does not have a rear access ladder fitted. Main thing is to ensure ladder does not clash with this fourth rib.
It all depends on what roof rack fitted and what brackets between rack and awning are used and positioning of the awning front to rear.
HTH
Brendan
19th Mar 2020 8:11 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Andy Foster wrote:
Big thanks to Brendan today for supplying and fitting my Batwing today
Click image to enlarge
@AndyFoster - have just sent you a message formerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
19th Mar 2020 10:10 pm
Dan_W
Member Since: 10 Mar 2020
Location: Kent
Posts: 52
Thanks Brendan
I see what you are saying, however with my prospeed rack and ladder, once the rear hatch is open there is only a small gap between then for the 4th rib to fit in to as per the below pic. (I guess it just needs fine tuning)
Plus the ladder will be quite high so I was worried it may put pressure on the canvas. I cant seem to see any photos of them open on a Disco with the rear hatch open but will keep looking Thanks again everyone
20th Mar 2020 12:30 pm
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4314
Dan, have a look at Andy Fosters photo using the Prospeed brackets.
Now IIRC the 4th rib is the highest one which goes across the back. Time for tape measure and level to come out. Looking at the photo the top rib is about 125-150mm above the roof rack.
The Batwing can be position so it opens above the rack and clear of the rear top hatch. Now how much it will come into contact with the canvas I do not know.
One solution would be to use an extension piece onto the Prospeed bracket to give clearance. The slight problem there could be the height of the awning on opening and closing. Might need a hop up to help.
HTH
Brendan
20th Mar 2020 1:25 pm
Dan_W
Member Since: 10 Mar 2020
Location: Kent
Posts: 52
Thanks Brendan
I have just been out with a tape measure and all looks good. Looks like a batwing awning will defo be on the shopping list in the next few months
20th Mar 2020 6:44 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
prosper front plate
I can't get hold of Andy at the moment so does anyone have any details about this front plate on his roof rack please.
Is it a buyable item or self made?
Thank you
Click image to enlarge
formerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
21st Mar 2020 10:38 am
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4314
Ben that is a Prospeed roof rack with wind deflector and folding awning brackets.
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Sorry everyone but not been very well of late.
The awning does sit quite high using the PS brackets so not envisaging any issues although I haven’t had time to get out for a try yet.
The front plate is a spotlight mounting plate from PS. When I bought mine they weren’t on their website so you need to call them about it.
Hope that helps all and again sorry for the delay in answering your questions
Cheers AndyD4 MY15 SE TECH
D3 gone but never forgotten.
21st Mar 2020 1:36 pm
Dan_W
Member Since: 10 Mar 2020
Location: Kent
Posts: 52
Thanks Andy, would love to see some photos once you get a chance to open it up.
Hope you feel better soon
22nd Mar 2020 3:36 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Thanks Brendan,
Just the front plate I wanted info on as I have the rest!
I’ve been in touch with Andy now 👍formerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
22nd Mar 2020 4:00 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Dan_W wrote:
Thanks Andy, would love to see some photos once you get a chance to open it up.
Hope you feel better soon
Cheers pal
Yeah can’t wait to try it out. I might go for a drive to a nice secluded spot and give it a go D4 MY15 SE TECH
D3 gone but never forgotten.
22nd Mar 2020 6:15 pm
qcnr
Member Since: 23 Nov 2017
Location: Norway
Posts: 117
Rather than start a new thread i thought I would ask the question on an established one.
I see most people fix their awnings to roof racks. We don't have a roofrack and use roof bars for our tent.
However the tent has T- channels all round so would fix the awning to this. Just wondering if anyone has experience with this?
Our tent is an AluCab style roof box that flips open...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Thanks again everyone 
