Discorick
Member Since: 22 Nov 2019
Location: Doncaster
Posts: 9
 
|
Hi all, so after a long list of troubles with my 2006 disco 2.7 we are finally getting to the end, everything now working as it should however, we still get on start up “engine systems fault” now if i read fault codes there is no codes using am obdii reader, however if i start the car “engine systems fault” comes on with the warming “!” Then clear the codes (of which it cant see any) it then clears the warning and does not come back on until you turn the cad off and on again, strange
Anyone have any input toward this? Ive tried the usual map sensor, maf sensor, turbo, 3 wire splice (which fixed the locking from key win) checked battery and alternator voltage, checked all bulbs still same issue
I will be going to someone with a proper landrover diagnostics who hopefully can read whatever fault it is picking up asap but thought id post up here too.
Thanks in advance
|
 15th Jan 2020 6:25 pm |
|
|
Discorick
Member Since: 22 Nov 2019
Location: Doncaster
Posts: 9
|
Had it plugged in, it was actuator arm problem, going to try another bottle of revive as that fixed the vvt’s sticking last month thinking maybe its still a bit carbon’d up in there and hopefully not caused vein damage from the sticking
|
| 16th Jan 2020 1:31 pm |
|
|
