Now am I right in thinking on my 2005 D3 the only pin that goes into the cars wiring is the blue cable into PIN 8, as I have a Thermo Top V??
I'm just double checking as I don't want to blow anything, and I have looked but can't find anything in relation to the early D3, most are later which use all three cables.
13th Nov 2019 2:15 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14152
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Cheers bud, so I'm assuming that this shows its the one pin then.
Click image to enlarge
Even the pics in the Wiki show more than one wire connected, so can only assume its a later D3/D4??
13th Nov 2019 4:42 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18567
Hi,
As the instructions state, the white/yellow/pink aren't used on the D3, they maintain the CAN bus link which is needed on some D4s.
On a D3, just insert the blue wire into pin 5 of the original plug.
Don't fit the white/yellow and separate them/tape them to make sure they don't touch anything or each other 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
13th Nov 2019 10:08 am
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Superb, thanks.
13th Nov 2019 10:13 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10719
interesting.
Didn't know that was in the shop.
13th Nov 2019 12:33 pm
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Cannot get my test kit to connect to my FBH, have tried every setting, even a different OBD reader, even tried 2 different versions of the WTT software.
I phoned where I got it from, and was talked through all the wiring and it's all good, and even sent a second OBD reader and fuse.
Now can only imagine 2 different outcomes.
1. FBH is fubarred.
2. Laptop is .
It's annoying 😣
30th Nov 2019 11:47 pm
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Anyone selling a working FBH or is there another way to test??
1st Dec 2019 8:03 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Hi, just want to help...
But does your FBH have a problem in the first place? I only read here that you can not get it connected with the webasto workshop software, or the k-line “reader” but does it not work normally in your car at all?
Second question: which k-line reader do you use? Brand, type/model..Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
Last edited by Motolab on 1st Dec 2019 8:32 pm. Edited 1 time in total
1st Dec 2019 8:23 pm
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
It starts, and after 30 seconds FBH winds down, doesn't fire at all.
So looks like a new FBH then 😣
1st Dec 2019 8:27 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
Well... it can be the glow plug inside the burner, but also the fuel supply, or fuelpump..
Which k-line reader do you use? Brand/model?Best regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
1st Dec 2019 8:35 pm
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Will have a look, as for the OBD reader I have no idea, came with the kit I bought off the site, and I know its not that as I have 2 and it still doesn't work lol.
2nd Dec 2019 2:03 am
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
If that is the case, I suspect a driver / USB port issue, instead of a FBH electronic issue... for the connection part I meanBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
2nd Dec 2019 7:59 am
Scooby_Jim
Member Since: 21 Jun 2019
Location: Swansea
Posts: 34
Yeah, will try my old laptop. Bloody Advent messing up lol.
2nd Dec 2019 8:03 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18567
Get a COM port set between 1 and 19, and make sure the same port is selected in Webasto Thermo Test.
The site shop supplied USB adapters use the CH340G chip, use the driver from https://www.disco3.co.uk/wiki/CH340G_Driver06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
.
