Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
ipcu et altox
bonsoir
je nai jamais réussi a faire fonctionner mes ventilateurs de mon D3 en fonction de la température réglée au préalable sur l altox
auriez vous quelques pistes?
merci pour vos éclairages
Philippe
26th Mar 2020 5:41 pm
Net_fisher2
Member Since: 23 May 2017
Location: Isle of Wight
Posts: 99
The fans dont run from the Altox on the D3.
27th Mar 2020 7:42 am
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 428
They do if you have the ipcu fitted, FBH gets to a pre selected temp and fires the internal fans up clear windscreen on a frosty morning .
Kineland
have you checked the winter summer setting on the ipcu, and that the plug on the winter/summer switch hasn't come of, the plug on the circuit board on my ipcu was very loose and kept falling off. Also make sure it is set for Altox on the switch inside the ipce box.
M6NIO
27th Mar 2020 8:26 am
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
hi Mick
je vais vérifier cela et je reviens vers vous
Philippe
27th Mar 2020 2:09 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 188
hi Mick
you say Assurez-vous également qu'il est défini pour Altox sur le commutateur à l'intérieur de la boîte ipce.
comment le vérifier?
merci
[/b]
27th Mar 2020 6:19 pm
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 428
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
