Member Since: 21 Oct 2016
Location: kent
Posts: 13894
TDV6 3.0 engine video
Wished to share in case it may be of interest
22nd Oct 2019 9:19 am
Dave Shirley
Member Since: 22 Sep 2011
Location: Oxfordshire
Posts: 448
Brilliant video, this bloke knows what he is doing, obviously not his first attempt or his last I suspect.
Very interesting and informative.
As for the lack of locating tabs on the shells, I would have thought that Ford or Land Rover would have come up with a modification for when rebuilding these delicate engines?
Looking forward to seeing the start up.
22nd Oct 2019 3:13 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
Fascinating stuff!
One comment on the first video - he said that the bearings spin after the bearing surfaces have become worn and the shells rotate, as there are no lugs to hold them in place. I’ve see it written, many times, that the lugs don’t make any difference, as they are only there to aid assembly and they have no affect on stopping a bearing from spinning.
So, who’s right?2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: 2 x FL2 as “second” cars 🙄
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
22nd Oct 2019 3:39 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
The lugs I’ve seen (not on these engines) would stop a baring rotating unless the forces are great enough to shear them off or bend them into profile. Is the issue that the shells weld themselves to the journal’s and will rotate regardless?012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
22nd Oct 2019 6:14 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13894
Another couple of videos which I found very interesting
22nd Oct 2019 9:40 pm
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
Red Merle wrote:
Fascinating stuff!
One comment on the first video - he said that the bearings spin after the bearing surfaces have become worn and the shells rotate, as there are no lugs to hold them in place. I’ve see it written, many times, that the lugs don’t make any difference, as they are only there to aid assembly and they have no affect on stopping a bearing from spinning.
So, who’s right?
I believe on the gen 2 engines, there are tabs on the bearings......and they still have been known to rotate.
Please don't take that as gospel, but I swear I have read that previously.Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
22nd Oct 2019 10:06 pm
knwatkins
Member Since: 19 Sep 2018
Location: Poole, Dorset
Posts: 716
Interesting videos and thanks for posting Gary.
I notice when he is torquing down the main caps he is doing them sequentially. I always thought it was best practice to work from the centre, outwards, in both directions to make sure everything was bolted down evenly? Kev
MY2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
MY2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey
22nd Oct 2019 10:16 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13894
Ur very welcome and indeed by the sounds of it the tabs make no difference what so ever in preventing them from spinning
So wondering that other 19.5 oil pump cover, could that indeed be the answer to stop shells from spinning by creating a bigger volume of oil around the crank ???
I also thought that, going from centre outwards, maybe he was just doing that as an example of how the shell caps are refitted
Must admit I learnt a lot after watching these and made more sense ref heat/ friction and how the crank then grabs the shells and spins them
Alas I haven’t got the engineering knowledge so clutching at straws really but would be so good to finally find a solution to stop them spinning
Only thing I’ve seen is that 19.5 oil pump, nothing from JLR as of yet
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum