Member Since: 23 Jan 2012
Location: Trondheim
Posts: 29
Webasto fault
Hi there
I have a 2010 D4 With the webasto Thermo top V, not the VEVO. Last winter it started to run for 1 minute and then stop again. I then replaced the burner unit with glow plug and all the rest. Still didnt work...
Then came summer and i didnt carre for it until now... I took it out from the car, disassembeld it and measured all the components, and they are all within limits. Why isnt it working? Could it be the main board?
Click image to enlarge
29th Oct 2019 10:48 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
I had the same I swooped the board and it worked . I’d by a second hand fbh of eBay about £50-60Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
30th Oct 2019 12:01 pm
HowardO
Member Since: 23 Jan 2012
Location: Trondheim
Posts: 29
Tnx for replying:)
Update for you who might experience the same
Error code 22h indicates error on glow plug and or glow circuit. Since everything is measured ok, according to webasto's techguy the circuit board is gone. Will Order me a used webasto from ebay and canabalize
30th Oct 2019 7:56 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
