detritus22
Member Since: 16 Sep 2017
Location: Strathaven
Posts: 65
  
|
Afternoon all looking for a wee bit help and advice from this great community 
Just plugged in my new toy and read the faults which are below
Auxilary Heater
B1D29-93 (2E) No start, even after restart attempt - Component failure - no operation
B1D33-92 (2E) Flame interruption during normal operation - Component failure - performance or incorrect operation
B1D34-68 (2F) Heater in lock out mode - Algorithm based failure - event information
U1A44-6C (2E) Fuel level
Body Control
B1B70-81 (28) Local interconnection network bus circuit 2 - Bus signal/message failure - invalid serial data received
( on 14-05-2018 20:27:14 at 67151 mi )
B1C13-3A (68) Driver's up/down mirror motor feedback circuit - Frequency modulation/pulse width modulation failure - incorrect, has too many pulses
( on 12-07-2018 10:20:54 at 68456 mi )
B1C14-3A (6C) Driver's left/right mirror motor feedback circuit - Frequency modulation/pulse width modulation failure - incorrect, has too many pulses
( on 13-05-2019 22:50:55 at 73744 mi )
B1C45-67 (68) Front windshield wiper park position switch - Algorithm based failure - signal is incorrect after the event
( on 30-10-2018 00:20:26 at 70314 mi )
B1D07-15 (68) Right turn signal circuit - General electrical failure - circuit short to battery or open
( on 21-10-2019 15:09:33 at 76024 mi )
B1D17-87 (28) Bus circuit - Bus signal/message failure - missing a message
( on 26-12-2018 12:50:50 at 71420 mi )
U0155-87 (28) Lost communication with instrument cluster control module - Bus signal/message failure - missing a message
( on 25-05-2018 18:31:33 at 67251 mi )
Instrument Pack
U0132-87 (28) Lost communication with ride level control module - Bus signal/message failure - missing a message
U0159-87 (2E) Lost communication with parking assist control module - Bus signal/message failure - missing a message
Transfer Case
U0122-87 (28) Lost communication with vehicle dynamics control module - Bus signal/message failure - missing a message
( on 14-05-2019 23:15:47 at 73801 mi )
Ventilation
B1B78-84 (2F) System pressure - Bus signal/message failure - signal is below allowable range
( on 01-11-2018 00:44:10 at 70336 mi )
Are these faults anything to be worried about or should i just clear them ?
Thanks in advance
|
 25th Oct 2019 4:11 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
Clear them
Have a drive then
Re read them
|
| 25th Oct 2019 4:24 pm |
|
|
