Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Tow bar bike carrier - Thule velocompact 927
Some info and pictures for anyone considering one and wondering on fit and function for a discovery
Bought just before Christmas from Halfords - fit is quite tight on the tow ball and had to remove the additional plastic shroud to fit but once in is solid as a rock 👍
The tilt function allows the boot to open and tail gate drop - about 5 mm too close for the bottom tailgate to go fully down and have weight on it but allows full access for dog etc
Now thinking about tow rack bags to use when needing extra luggage!
Last edited by lard on 26th Dec 2019 2:14 pm. Edited 1 time in total
26th Dec 2019 2:05 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Folded out
26th Dec 2019 2:07 pm
lard
Member Since: 07 Jul 2018
Location: Wiltshire
Posts: 143
Turns out the black wheel carriers are adjustable so with a slight shove in the bottom tailgate comes down and can be crawled over when tilted 👍
27th Dec 2019 1:20 pm
Andyyav
Member Since: 22 May 2019
Location: Norfolk
Posts: 304
I like it, been considering one of these wasn’t sure how practical they were, wondered if something for the roof rack would be better but this looks good
27th Dec 2019 4:37 pm
Sandyh
Member Since: 23 Apr 2018
Location: Sheffield
Posts: 37
Great, thanks for the review and photo's.
I'm currently stuck with a MaxxRack for when towing the caravan but its a pain in the when travelling abroad with the dog and stuff in the boot.
2 straps to undo and bundle on the roof, then squeeze behind a mucky car and bikes to undo the nut, and lower the bikes to floor.
Great product and will keep it for towing - but I'll look out for a thule rack now I know it clears the tailgates.
Sandy.
6th Jan 2020 11:11 am
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Stupid question - do these need a fixed ball or happy with removable?Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
+ 1 for a good fit on the removable tow bar! Give the clamping nut a good tighten and its nice and solid. On a long trip we pull over every so often to check all is well with cycle rack and roof box etc
6th Jan 2020 4:19 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Excellent - wasn't expecting that answer! Result Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
6th Jan 2020 4:56 pm
BeardManMatt
Member Since: 09 Feb 2020
Location: Tamworth,Staffs
Posts: 54
Dredging up a thread here but has anyone fitted one of these to a fixed ball? Preferably a Tow Trust TL1 ball.
Hoping there is enough room as every other option I seem to want is unavailable.
18th Jun 2020 7:41 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4508
Lard's images show it on a fixed tow bar. Looks like an extended tow ball for an Al-Ko hitch.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
18th Jun 2020 7:48 pm
BeardManMatt
Member Since: 09 Feb 2020
Location: Tamworth,Staffs
Posts: 54
oh is it?
I saw the green knob on the side and assumed it was a LR removable.
18th Jun 2020 7:55 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4508
I think you can just see one of the stays to the left.
The LR fixed tow bar still has the green knob. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
18th Jun 2020 8:07 pm
BeardManMatt
Member Since: 09 Feb 2020
Location: Tamworth,Staffs
Posts: 54
I feel a bit of a knob now.
18th Jun 2020 10:02 pm
TT___50
Member Since: 07 May 2017
Location: God’s own Country
Posts: 171
I’ve got a genuine fixed and as Lard says, can’t fit without removing a plastic cover.
I think I need to get a ball with an extended neck, the Thule instructions state the length of the ball and neck should be at least 73mm iirc
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum