Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
[For Sale] D3 bits - EAS Tool, brakes, etc.. - Ad ref 190629-620
Purchased ad ref - 190629-620.
Hi I traded the disco 3 in for a newer Landy so have a few parts that i never got around to fitting before trading in. Al prices are excluding P&P so you can either use the forum courier network , collect it (I Live in Leigh, lancs WN7 area) or we can we sort the best postage out. I've had some bad experiences on postage before so i normally send tracked and signed, courier, etc...
items for sale :
grill - sold
brake pipes - sold
load cover - sold
EAS tool - sold
Height sensor front (LR020157G) - LR stamp on it ?? (new) - £30 ovno
Prop shaft bearing (Britpart) - new - £10 ovno
McGuard locking wheel nuts 24214 SU (New) - £15 ovno
Front caliper brake fitting kit (SEE500020k) (New) - £5 ovno
Rear caliper and fitting kit SOB500042 & BCF1368a - britpart - new - £25 ovno
Front axle transfer valve RVH000095 (genuine LR) new - £50 ovno
Brake wear sensor SEM00024 new - £8 ovno.
Sealey service/epb reset tool - VS8624 - Used a couple of times only boxed and instructions. £65 ovno.
Last edited by paulb_d3 on 27th Jul 2019 3:34 pm. Edited 6 times in total
30th Jun 2019 10:35 am
Lutonmike
Member Since: 28 Apr 2015
Location: Luton
Posts: 149
Hi
Would like brake pipes if still going.
30th Jun 2019 11:21 am
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Hi lutonmike - yes still for sale you have a PM
30th Jun 2019 7:21 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Brake line kit sold to Lutonmike
30th Jun 2019 9:32 pm
vodd
Member Since: 12 May 2019
Location: WR66DQ
Posts: 11
Dibs on parcel shelf please
30th Jun 2019 9:50 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Hi Vodd you have a PM
30th Jun 2019 11:19 pm
jonny teflon
Member Since: 02 Dec 2009
Location: staffordshire
Posts: 140
Dips on grille pm inbound
30th Jun 2019 11:21 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Hi jonny sent you a PM
30th Jun 2019 11:29 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14036
Hi
Ref the McGuard locking wheel nuts 24214
Hope u don’t mind me asking but Am enquiring for someone who has a D3 and wished to check there fit plse , or are they for a different type of wheel because of the washers that are normally on the D3 nuts , many thks
1st Jul 2019 12:58 am
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 416
2nd dibs on parcel shelf
1st Jul 2019 7:24 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
parcel shelf provisionally sold to Vodd and grill to jonny teflon - you have PM's
1st Jul 2019 9:45 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
gstuart wrote:
Hi
Ref the McGuard locking wheel nuts 24214
Hope u don’t mind me asking but Am enquiring for someone who has a D3 and wished to check there fit plse , or are they for a different type of wheel because of the washers that are normally on the D3 nuts , many thks
Hi , hmmm you got me thinking now i recall ordering them via an alloy wheel website when i was looking at a set of stormer alloys and was recommended these. there doesn't seem to be much info on the mcgard site but the various alloy wheel sites give a few options this is one of them. not sure if it makes any difference or not
1st Jul 2019 10:12 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Grill now sold and load cover sold - thanks
2nd Jul 2019 10:05 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Some prices revised to move these on as the other half wants shut - suspension parts reduced.
Also looking at doing 2x bundles if anyone is interested :
Suspension bits - Front Valve block and both front and rear height sensors as listed above - £95 +P&P as a bundle for all three.
Brake bits - Rear Brake caliper , wear sensor and both Front and rear fitting kits - £30 + P&P
3rd Jul 2019 9:35 pm
paulb_d3
Member Since: 02 Apr 2018
Location: leigh, lancs
Posts: 24
Ok folks , weekend bargain - EAS tool reduced to £50 incl P&P if anyone is interested
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum