Member Since: 17 Dec 2013
Location: Chichester
Posts: 179
[For Sale] Boot Liner by CustomerCarCovers
Waterproof boot liner for D3/D4, with split seat configuration. Just needs fresh adhesive velcro to fit to the sides (can be bought from Ebay or similar). Easy to fit and great protection for rear. Been well used for our dog but still in good condition.
Member Since: 06 Mar 2018
Location: Wiltshire
Posts: 392
These are really durable. My Velcro sides kept unsticking so used pressed studs into the material and screwed the other half into the trim. Even with a 33kg dog leaning against it, it remains attached.
21st May 2019 8:17 am
cosmic329
Member Since: 17 Dec 2013
Location: Chichester
Posts: 179
I agree - I have had wet sailing kit, wet dogs and wet rugby children and kit on it and nothing has gone through + our ridgeback is 50k and leans on the sides and they have stayed put even with velcro. I did purchase some extra adhesive velcro from Ebay which worked a treat right from the start, but your method sounds more thorough!Discovery 4 Landmark ‘16
Discovery 4 SDV6 HSE '65 - crank snapped
Discovery 4 SDV6 HSE '61 - gone
Discovery 3 Tdv6 HSE '56 - gone
Defender 90 Tomb Raider '51 - gone
Defender 110 XS '54 - gone
21st May 2019 10:36 am
conman69
Member Since: 11 Aug 2012
Location: Norfolk
Posts: 431
Very good bit of kit but why doesn't the velcro stick to the sides Discovery3 TDV6 GS
Disco3.co.uk front orange +white tailgate stickers
Belts, pulleys, oil pump replaced, double tow-bar electrics
Land Rover rubber mats throughout, tinted windows, wind deflectors, smoked side repeaters, retro fitted Garmin, smooth leather steering wheel, cruise control + radio switches, 19" HSE wheels, Bearmech side-tubes, BAS IFBH module, roofbars.
LML Star Deluxe
21st May 2019 2:46 pm
cosmic329
Member Since: 17 Dec 2013
Location: Chichester
Posts: 179
I think it is a combination of the plastic not being clean enough (they say that most car plastics have a coating that you need to clean off - the manufacturer recommends Autoglym Intensive Tar remover - which I did not do the first time + the adhesive that they use on the velcro seems to lose its stick in the heat. After finding that the sides kept falling off, I replaced those sections of velcro with some extra strong adhesive type from Ebay and cleaned the sides with the Autoglym. After that I did not have a problem with mine.Discovery 4 Landmark ‘16
Discovery 4 SDV6 HSE '65 - crank snapped
Discovery 4 SDV6 HSE '61 - gone
Discovery 3 Tdv6 HSE '56 - gone
Defender 90 Tomb Raider '51 - gone
Defender 110 XS '54 - gone
21st May 2019 2:52 pm
Shendley78
Member Since: 29 May 2017
Location: Kenilworth
Posts: 56
Liner
PM sent?Disco 3 - base player
56
160k
No mods just glad it’s a runner.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but why doesn't the velcro stick to the sides 
