Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Nov 2018 9:12 pm
vidar20
Member Since: 12 Dec 2016
Location: Ålesund
Posts: 3
DTC P00000 - No Signal / No communication on 2008 D3
Hi
Had some problems with EGR valves, so I had them blanked and did a software delete at a local firm here in Norway.
The software delete is supposed to "remove" DTC P0402/P0405/P0489/P0490
The car has been running great for 2 months, but has now startet to throw P0000 and goes to limp mode. This sometimes occors after the car reminds me to run at DPF-clean
My car is a 2008 with DPF and I know and EGR-delete is not recomended.
Have orderd a IID-Tool BT and its in the mail
Now to my question: is it possible to apply the DPF-delete patch from BAS if it is the DPF that is causing the problems. (questinon regarding the DPF-patch: do I have to "empty" the DPF-filter?)
And is it possible to also apply the EGR-delete patch from BAS on a 2008 D3 ?
16th May 2019 7:05 am
chris-rutter
Member Since: 06 Nov 2017
Location: Liverpool
Posts: 77
Hi Vidar,
I know you can apply the BAS EGR delete to a2008 D3 add I did it to mine recently.
But on the DPF bits you might be best to pay another article as some of the clever people here are more likely to see it.
Regards
Chris
16th May 2019 10:28 am
Maxime
Member Since: 12 Apr 2019
Location: Trier
Posts: 35
I was also keen to blank the EGR so I contacted Pete Bell. But he told me cars with DPF can't be blanked.
If there are any other solutions for that, please tell me
16th May 2019 12:44 pm
vidar20
Member Since: 12 Dec 2016
Location: Ålesund
Posts: 3
Thank you for the feedback
Got at reply from BAS:
Hi
For the egr patch on the iid tool you would need to purchase both dpf removal and also egr patch from us.
You could also need to remove the contents of the dpf exhaust manually on the car.
________________________________________
From: Vidar <site>
Sent: Thursday, May 16, 2019 8:33:00 AM
To: site@bellautoservices.co.uk
Subject: BAS Website Email "EGR - delete on 2008 D3"
From: Vidar
Subject: EGR - delete on 2008 D3
Name: Vidar Tennøy
Message: Had some problems with EGR valves, so I had them blanked and did a software delete at a local firm here in Norway.
The software delete is supposed to "remove" DTC P0402/P0405/P0489/P0490
The car has been running great for 2 months, but has now startet to throw P0000 and goes to limp mode. This sometimes occors after the car reminds me to run at DPF-clean
My car is a 2008 with DPF and I know and EGR-delete is not recomended.
Have orderd a IID-Tool BT and its in the mail
Now to my question: is it possible to apply the DPF-delete patch from BAS if it is the DPF that is causing the problems. (questinon regarding the DPF-patch: do I have to "empty" the DPF-filter?)
And is it possible to also apply the EGR-delete patch from BAS on a 2008 D3 ?
Car Make: Land Rover
Car Model: Discovery 3 2008 HSE
Cars Chassis Number: SALLAAA648A47xxxx
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum