Member Since: 20 Nov 2018
Location: Sheffield
Posts: 10
Check your gearbgearbox cooler pipe NOW.
On starting engine oil change recently I found an oil leak. Not to bore you with the long story....I will save that for my friends the pipe between gearbox and oil cooler had been rubbing on the front diff breather ,the pipe was not clipped up. I assumed this was overlooked by a previous mechanic however having fit the new pipe the bolt is to big to fit the bracket. On examination the old pipe bracket was also drilled too small and has never had a bolt in.Is this how landrover supply the car?
In any case check yours now it can be viewed through passengers front wheel arch. Further to this if you need to change this pipe open up the hole before fitting.
Note.....support gearbox/ remove xmember/ remove front propshaft/ at this you can manage to remove and refit pipe.
(Have some Radox ready) good luck.
I would like to know if it's only me with unclipped chaffing pipe please let me know
10th Apr 2019 4:56 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20842
And for the D3 owners who stumble on this thread, your pipes will begin rusting through, and leaking...My D3 Build Thread
Rust they do. Just had mine replaced as they started leaking at the rubber mounting point on the bottom of the engine. My thoughts are the rubber gasket retains moisture & this caused the pipes to corrode & then fail.
Click image to enlarge
Cheers n Gone Nick MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
10th Apr 2019 9:28 pm
Roversmith
Member Since: 20 Nov 2018
Location: Sheffield
Posts: 10
But still was the pipe bolted to the front of the engine or left dangling? Did bolt fit through bracket? All seems strange.
Had that on mine !
when I had the engine rebuild my indy replaced the pipe fitting with an off the shelf clip on fitting as LR price for the whole tube (it's the oil extraction tube !) was extortionate Morris Dancers: Drinkers with A Dance Problem
12th Apr 2019 11:52 am
Roversmith
Member Since: 20 Nov 2018
Location: Sheffield
Posts: 10
Did gearbox flush today..... was planned but leak on pipe forced it forward as I could not know what was lost. Big thanks to Robbie for his guide....please note had to lift revs a little at start of section 12 as pump did not prime on tickover.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum