Member Since: 20 Jun 2012
Location: south yorkshire
Posts: 125
What does this mean Max safe speed 80mph
Just had tyres and tracking done plus new lower wishbone bushes
I have coming up on my dash readings
Max safe speed 80mph
7th Oct 2019 1:53 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72943
New one on me.
7th Oct 2019 1:54 pm
Browny90
Member Since: 19 Jul 2016
Location: Ashbourne
Posts: 697
My guess is the tracking hasn't been done correctly, and/ or your steering alignment sensor needs calibrating?
Did the ABS light ect come on too? and terrain response not work?Disco4 MY16 SDV6 Landmark Black
Disco4 MY12 SDV6 XS Orkney Grey (Gone)
Defender 90 200tdi Completely rebuilt.
7th Oct 2019 1:58 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8157
The speedo can be set to give a warning when a certain speed is reached, usually a “bong”, I have never looked at the read out when mine goes off as it is set at 75mph It can when others can't,
It will when others won't,
It goes where others don't.
7th Oct 2019 2:01 pm
barnsleytyke
Member Since: 20 Jun 2012
Location: south yorkshire
Posts: 125
The tracking was done by a guy who was bang up to date. It was on a RR machine which is far in front of the Hunter. He went out of his way to correct everything then gave me the read out
I am wandering if when my tyres were done my air suspension has been rectified
Never had this safety speed on before
7th Oct 2019 3:20 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26750
You need to go into the settings menu, and using the steering wheel buttons navigate to the speed warning, and turn it off. My guess is someone has been meddling and turned it on!
7th Oct 2019 3:53 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6903
Well I never knew that...... Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
I had mine 4 wheel aligned in July 18 and via the IId tool put it into tight tolerance mode. When the job was done and was about to set off mine did the same. I used the tool to clear the faults and it went away (And has never returned)The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
7th Oct 2019 4:50 pm
barnsleytyke
Member Since: 20 Jun 2012
Location: south yorkshire
Posts: 125
Thanks for replies chaps
Will post result
7th Oct 2019 5:35 pm
thommo1927
Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 416
As mentioned above ,Go into settings to change the speed alarm.
7th Oct 2019 6:52 pm
Ruper
Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
Max speed 80
In mine it means my wallet is about to burn my pants, (V8)2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
My thought was it's been left in tight tolerance mode after tracking was done, but IIRC it displays "not in customer mode" when you start the car ... at least it does on a D4.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum