reedy68
Member Since: 20 Jan 2019
Location: barnstaple
Posts: 7
  
|
[size=18]good evening ladies & gents
I have just bought my 1st disco 3 on a 58 plate and I'm having a few issues with the ride height.
when I got the car home it looked like it was lower on the near side. After getting a friend to look at it was discovered the ride height was way out.
he plugged in his computer thing took a few measurements and re-set the height.
Everything was fine until my son raised the suspension now when it on road setting its gone back to being lower on the near side{not as bad as before } if anyone has any suggestions I would be very grateful.
|
 7th Feb 2019 8:43 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
What computer thing did your mate use.
He probably altered the heights but didn't calibrate and save the heights, this can only be done by a few select diagnostics
|
| 7th Feb 2019 9:20 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
double post
|
| 7th Feb 2019 9:20 pm |
|
|
reedy68
Member Since: 20 Jan 2019
Location: barnstaple
Posts: 7
|
thanks for your reply I will check with him tomorrow many thanks
|
| 8th Feb 2019 7:35 pm |
|
|
