Member Since: 07 May 2018
Location: High Peak
Posts: 7
Transfer box
Hi,
Im looking for some advice and help.Im actually posting for my neighbour (he's Italian so he's asked me to help) he has a Range Rover 2006 2.7 HSE automatic which he's had for about 18months.Over this period he's had all the usual problems! being a keen DIY enthusiast he has managed to fix them. The latest has been the transfer box (or in my opinion the diff motor) any way he's changed the transfer box and had the diff motor of. The codes showing now are P2789 + P0915.
A couple of questions:is it possible to have put the diff motor back in a wrong position and if so could this be re calibrated or would it need physically removing and resetting?(could the rear diff be locked)
He only has the basic software and can't clear these codes or re calibrate the motor does any one know what software is required? we are based in the Peak District and would be happy to pay someone with the right software to recalibrate + clear the codes?
Any advice would be welcome.
Cheers
Stuart
07970490158
29th Sep 2024 10:11 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
If the motor has been removed it needs calibration, he could try a manual calibration if diagnostics aren't available. If you use the search function above you'll find the procedure. P0915 suggests a possible electrical issue (or calibration) so check the plug and the pins carefully. P2789 suggests a calibration issue
Does the car have an "E" rear diff?yµ (idµ - eAµ) ψ=mψ
29th Sep 2024 2:01 pm
Eldon
Member Since: 07 May 2018
Location: High Peak
Posts: 7
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
