May have already been asked and I think I already know the answer, but will my winter 17" wheels off my D3 fit onto my 2002 D2.
Cheers
PaulWish I had a D3, but at least I now have a Landie - YIPEE
11th Jan 2008 6:28 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Nope , tried it myself a few weeks ago just out of curiosity.Stud Pattern is OK but the centre spigot & nuts are not.
I presume there is something out there though that adjusts for these minor problems .
Yes, will fit but need to use D3 wheel nuts and a spigot ring for the centre. AndrewS should be able to tell you where to get the ring from as Craig has them on his D2
Hmmm - anyone know what the wheel weight rating is for a D2?
I have 5 non-LR wheels currently for sale on fleabay - they were from my D3 but after joining this great group I realised they were not the correct weight rating for a D3; I'm now trying to sell them for the 2nd time and I think it would help if I could state what vehicle they would suite, even if it means they need a spigot ring.
LRs are a fond memory, apart from the maintenance.
11th Jan 2008 7:43 pm
simonsi
Member Since: 14 Oct 2007
Location: Auckland
Posts: 1264
Discowex wrote:
Nope , tried it myself a few weeks ago just out of curiosity.Stud Pattern is OK but the centre spigot & nuts are not.
I presume there is something out there though that adjusts for these minor problems .
I have a spare set of the necessary centering rings (ie 4), FOC to a good home if anyone wants them.
As I no longer have my D2 they are unused and surplus. While I had it I had both the earlier 6 spoke RR 19" wheel (smaller, black nuts), and RRS HSE 19" (D3 silver nuts). Both styles fitted with no fouling or other issues when fitted with 255/55/19 tyres.
I still have some new tyres fitted to new RR wheels so will be seeing if they fit the D3 shortly, I´ll swap over the tyres to the RRS rims if not...Cheers
Simon
11th Jan 2008 8:33 pm
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2576
Dredging the grey matter - If I remember rightly, the spigot rings & nuts can be obtained from Covertwiseguy on Ebay?
The HSE19's certainly look good on the D2 Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
Nope , tried it myself a few weeks ago just out of curiosity.Stud Pattern is OK but the centre spigot & nuts are not.
I presume there is something out there though that adjusts for these minor problems .
I have a spare set of the necessary centering rings (ie 4), FOC to a good home if anyone wants them.
As I no longer have my D2 they are unused and surplus. While I had it I had both the earlier 6 spoke RR 19" wheel (smaller, black nuts), and RRS HSE 19" (D3 silver nuts). Both styles fitted with no fouling or other issues when fitted with 255/55/19 tyres.
I still have some new tyres fitted to new RR wheels so will be seeing if they fit the D3 shortly, I´ll swap over the tyres to the RRS rims if not...
Just sent you a PM Simon.Wish I had a D3, but at least I now have a Landie - YIPEE
12th Jan 2008 1:49 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Member Since: 14 Oct 2007
Location: Auckland
Posts: 1264
Discowex wrote:
http://cgi.ebay.co.uk/Spigot-Balance-centre-Ring-Land-Rover-Range-Rover_W0QQitem
OK to use Or are they ?
Personally, taking into account the weight of the wheel, weight of the D2 and the loads involved, I wouldn´t use plastic rings - they may well be easier than metal to damage when removing the wheel for maintenance etc.Cheers
Simon
Last edited by simonsi on 15th Jan 2008 10:52 pm. Edited 1 time in total
15th Jan 2008 10:33 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Simon thanks
I presume that it was suppose to be " I wouldn't use -..........."
15th Jan 2008 10:39 pm
simonsi
Member Since: 14 Oct 2007
Location: Auckland
Posts: 1264
Discowex wrote:
Simon thanks
I presume that it was suppose to be " I wouldn't use -..........."
...yes, I´ve edited it to correct just so when space aliens dig up the server in the year 3015 one of them doesn´t get misled by my post and put D3 wheels on his D2 using plastic rings and come a cropper at the first bend... Cheers
Simon
15th Jan 2008 10:54 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10355
D2 tyre weight rating is 106, so lower than D3 (at 111), so would assume that wheel rating is probably 900kg (same as RRS).
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
16th Jan 2008 9:40 am
simonsi
Member Since: 14 Oct 2007
Location: Auckland
Posts: 1264
Al - agreed but I was really talking about the actual weight of the wheel and tyre, they aren't the lightest of beasts and it would be quite easy to graunch a plastic ring while mating the wheel to the hub IMHO, hopefully (and mine were), the metal rings would be more robust...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
?
...yes, I´ve edited it to correct just so when space aliens dig up the server in the year 3015 one of them doesn´t get misled by my post and put D3 wheels on his D2 using plastic rings and come a cropper at the first bend... 
