Member Since: 13 Aug 2009
Location: Not London Anymore (or the US for that matter)
Posts: 1923
D3 V8 spark plug change - how long?
Quick question for anyone who's done this - roughly how long would it take to do the job assuming all the correct tools and usual hiccups along the way?
Thanks.PAGODA
20th Oct 2018 5:34 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6583
Less than two hours start to finish.
20th Oct 2018 5:36 pm
pagoda
Member Since: 13 Aug 2009
Location: Not London Anymore (or the US for that matter)
Posts: 1923
Many thanks. Very grateful to you.PAGODA
23rd Oct 2018 3:15 am
pagoda
Member Since: 13 Aug 2009
Location: Not London Anymore (or the US for that matter)
Posts: 1923
Finally got around to doing this. Took about 2.5h including faffing around trying to find the right extensions. I did remove the heat shield to get to the left hand bank; made life easier by far. PCV removed on the right was all that was required. Check the plug gaps before fitting, otherwise no problems.PAGODA
18th Nov 2018 7:10 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6583
Yeah, I replaced the PCV at the same time last fall. Seemed like a smart idea considering it was original.
What plugs did you end up using if you don’t mind me asking?
18th Nov 2018 8:13 pm
pagoda
Member Since: 13 Aug 2009
Location: Not London Anymore (or the US for that matter)
Posts: 1923
HI,
Thanks for your help on this.
I ended up using the iridium plugs. Gapping was uniform (mostly - didn't want to mess for the sake of .05mm). Runs nicely on then new set. The old ones were uniformly gapped at about the same. Some sings of wear but otherwise pretty good. They seemed to be wearing well. Coils all OK.PAGODA
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum