Hi all.
I’ve just brought my 2nd disco 3hse on a 55 plate ( sold 07 one in February)
Has anyone wired up a 12s before and is it easy-ish?
I’ve been looking at prices for this and looks quite expensive, about £100- £200
so is there a cheaper way of doing this?
Or do I have to get a specific one for the d3?
Anyone with knowledge or an idea would be great
And also anyone know where to get a cheap one?
Cheers
Scrog
5th Aug 2018 9:20 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
5th Aug 2018 9:26 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14027
Re: 12s wire up
Scroggy01 wrote:
Hi all.
I’ve just brought my 2nd disco 3hse on a 55 plate ( sold 07 one in February)
Has anyone wired up a 12s before and is it easy-ish?
I’ve been looking at prices for this and looks quite expensive, about £100- £200
so is there a cheaper way of doing this?
Or do I have to get a specific one for the d3?
Anyone with knowledge or an idea would be great
And also anyone know where to get a cheap one?
Cheers
Scrog
Hi
As Bodsy mentions easy to fit
I made a 12s lead up just to plug my ctek in but easy to make ur own lead up if u wish, buying the 7 x core cable
thanks to all your replies, it does look relatively straight forward, so will get a lead already made up and (try) give it a go,
i did put one in on my disco2, but wasnt sure if it would interfere with the other electrices, like showing fault lights on the dash on d3.
i will keep you posted and let you know if it goes well or not well
Ok so an update on how it’s going
I got the wire, plug and relay.
Wired the plug,no problems
Went to attach plug to mount already on the back and it don’t bloody line up
The plug holes x3 are nowhere near the ones already there
Is there a way around this or is there a Land Rover one I have to get?????
Any help on this would be great 👍
Cheers
Scrog
11th Aug 2018 12:31 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14027
Hi
Don’t forget the towing socket mounts sideways , u will also need the spacer and rubber cover , also a 15amp fuse
hi GS.
thank you for the info you sent
i have got this spacer, put it on/in. and happy days, all working, as got a relay system on it to stop charging, when car has stopped, so all good
thanks again.
scroggy
10th Oct 2018 3:29 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14027
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum