Member Since: 15 Jan 2016
Location: GL
Posts: 10509
Global window close
Lots of people on here say this can't be done.
But looking at the wiring diagrams the front windows have a grey wire to them (from CJB FET) call global close/open.
Can I enable something with the IID CCF ?
10th Aug 2018 9:48 pm
PCT3
Member Since: 13 May 2017
Location: Kent
Posts: 144
Land Rover have been trying to do this since the disco 1 where it was connected to the alarm system so on locking the car all windows closed, I have never seen one working, but the system gives me loads of trouble on our site training vehicles as the windows keep failing to either open or closeDiscovery 3 HSE 07
Discovery 1, Search & Rescue SE4x4 Responce
Fiat Decato motor home
Mazda MX5
11th Aug 2018 8:21 am
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
Does the D3 have global opening?
11th Aug 2018 8:31 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
What are your site training cars? D3 ?
Once enabled do you hold the lock button to roll windows up?
I guess they thought it was pointless to enable as rears can't be controlled.
11th Aug 2018 8:43 am
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
Global closing is not enabled for D4s in Australia. I enabled it on my D4 with an IIDTool, it is just a CCF edit.2016 D4 TDV6 Corris Grey
IIDTool BT
11th Aug 2018 10:12 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
Enabled global open and close but drivers window won't close when key held.
How do you trigger it?
11th Aug 2018 11:22 am
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
open the window then press down again, same on closing. L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
11th Aug 2018 2:10 pm
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
Pete K wrote:
Enabled global open and close but drivers window won't close when key held.
How do you trigger it?
Global opening and close have to be enabled via an IID tool then?
11th Aug 2018 3:06 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72918
Is this a good time to point out that the global closure on the D4 works via the handle button.
But not for the sunroof (fob or button). It wouldn’t be a bad idea to have it do that but prob a different department and they didn’t get the memo.
11th Aug 2018 4:50 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
How does it work on a D4 then dsl ?
11th Aug 2018 5:20 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72918
Press & hold the lock button on fob, car locks and then all windows go up. Same with the square button on the handle with keyless entry malarkie. Except the sunroof, which my K reg Cavalier did in ~1993 ISTR.
11th Aug 2018 5:24 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
Yes I was just thinking that the 1990 cavalier closed all 4 windows!
11th Aug 2018 5:37 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72918
Thinking about it, the sunroof might have been a crank handle version. Was a long time ago in a galaxy far, away.
11th Aug 2018 5:42 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
Some cavaliers had electric sunroofs. But the omega closed it from the key. And could be fitted to cav.
Cav has all 4 windows one touch up and down!
11th Aug 2018 5:44 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10509
Nope it don't seam to work. Not surprised.
Found an RF global close option. That didn't help.
There is a lazy close option but battery appears to be low.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum