JohnWiggy
Member Since: 14 Jan 2013
Location: Lancashire
Posts: 24
  
|
Pin prick holes in sump and oily around the sensor, slight leak when stood for a few days. So figure I need a new sump etc. What will I need to buy to complete the job and any advice where to buy from? Is it worth considering a reconditioned part? 
Thanks 
|
 27th Jul 2018 4:17 pm |
|
|
jetmech
Member Since: 22 Feb 2016
Location: Suffolk
Posts: 271
|
When I changed my sump, the new one came with the temp sensor pre-installed. I cannot remember if I changed the seal or not. Simon.
2008MY Dicovery 3 TDV6 SE Manual
|
| 27th Jul 2018 4:41 pm |
|
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10601
 
|
Seals are designed to be reusable according to the factory manual. They are metal. They are also expensive!
|
| 27th Jul 2018 7:14 pm |
|
|
Henda
Member Since: 05 May 2016
Location: Gateshead
Posts: 473
|
New gasket for me
Mind you don't trap the gasket on refitting, done mine on the drive no problem up on ramps plenty room All transmission oil replaced
3 flash indicators
All timing belts changed
EPB serviced
De cat fitted
Wind deflectors
De-tango done
Tints fitted
Egr blanked
|
| 27th Jul 2018 7:26 pm |
|
|
