Riggasurf
Member Since: 27 Jun 2014
Location: Portsmouth
Posts: 5
  
|
Hi all, I wondered if anyone knew the best place to get all nuts and bolts needed for front and rear, upper and lower wishbone arms, I am having to replace some bushes again so am getting a garage to Poly-bush the lot but they are not going to be able to salvage the old fixings, a quick call to paddocks came back at £115.49. Cheers Ryan
|
 25th Jul 2018 12:23 pm |
|
|
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5096
|
If you're replacing bushes 'again' you shouldn't need to be cutting out the bolts as they were surely greased last time round, rather than the factory who fit them 'dry'. Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me  )
|
| 25th Jul 2018 12:28 pm |
|
|
|
|
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
|
Same don’t poly bush, looked into it when I done mine and people were having to many problems with them on the D3 for my liking. Brought genuine arms and had no issues 12 months on so far Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
| 25th Jul 2018 1:22 pm |
|
|
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5096
|
You are still happy with the Superpro bushes though aren't you DM? Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
|
| 25th Jul 2018 1:24 pm |
|
|
