Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Rear brake hose bolt
hi
bought some new rear brake hoses and pipes for when i do the rear upper wishbones
but the bolt that goes onto the calliper that hold the brake hose on i can’t find and been looking and wondering if someone may know the part number please
it’s the bolt in the pic that i’m after x 2 plse
thks so much in advance
9th May 2018 11:54 pm
LeighW D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 918
Hi gstuart - I can't find a number either but a check of Google images seems to have the bolt already on the part (LR058009) held in place by brass or copper washers.
If your supplier didn't have the bolt on the part get back in touch with them for supply options or try to remove your existing bolts and use them.
HTH, LeighLeighW
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
10th May 2018 1:07 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
hi Leigh
many thks, as i was ordering new parts i purposefully bought a large plastic bin to put all new parts in as they arrived , alas turned the thing out and not there
indeed and a good point , think that’s the best course of action to get in touch with the supplier , alas surprised u can’t get them on there own
when i was fitting a new rear suspension valve block ( what a job that was ) i looked over what needed to come off , old brake hose bolt already looks chewed up and that’s why i double checked on the brake hoses
just ensuring i don’t forget anything before i start replacing the rear upper wishbones
thks again for looking
10th May 2018 2:09 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Its callled a banjo bolt, I would happily use the old one again and again, new washers are the important bit.
10th May 2018 6:53 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
hi
many thks, rang the company and there going to send some out for me , if i remember right it’s 2 x copper washers on each banjo bolt
also ordered 4 x new bleed nipples and dust covers for them
indeed, but the old banjo bolt heads looks as though molegrips have been used
got the rear brake hoses x 4 and the 2 x brake rear pipes
can’t think of anything i may need when i replace the wishbones
10th May 2018 11:37 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
yeap 2 copper washers per corner
10th May 2018 12:10 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
many thks as always
10th May 2018 12:23 pm
Disgoeshere
Member Since: 06 Dec 2014
Location: North East
Posts: 278
gstuart wrote:
hi
many thks, rang the company and there going to send some out for me , if i remember right it’s 2 x copper washers on each banjo bolt
also ordered 4 x new bleed nipples and dust covers for them
indeed, but the old banjo bolt heads looks as though molegrips have been used
got the rear brake hoses x 4 and the 2 x brake rear pipes
can’t think of anything i may need when i replace the wishbones
HI Gary
This may be of some help whats needed admired this guys tenacity and humour
&t=53sAndy
07MY (8A) D3 2.7 TDV6 Manual SE
New oil pump, water pump, cam belt - DM
New prop, new clutch TVLR,Beanie Grille,Black & Silver Badges
All Filters, oil change,clock on dash,4x4 info,RLD Protector,silicone hoses
Front and Rear TRW low Dust dtec V8 brake upgrade,new oil sump
10th May 2018 2:05 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
bless u, will have a look to see what’s in store
just looking at bush pullers, for that hub knuckle bush i think it’s called
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum