Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4405
Alternator repair - Finished!
I'm going to overhaul my spare alternator this weekend.
I've got Flacks guide to hand. Already took the diode pack out of the alternator, and cleaned up, just got to put the new bits in.
I'll keep this as a spare.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
Last edited by rrhool on 21st Jan 2018 8:54 pm. Edited 2 times in total
12th Jan 2018 11:52 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
hi
good luck with the repair
great to know as if i’m honest i didn’t realise u could recondition them urself
learn something every day
12th Jan 2018 1:04 pm
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
Hi,
Please update when done as I am interested in doing this to mine. I have a sense lead error message and intermitttent red light with reduced charging voltage so from looking arround it seems to be either a connector problem, brushes worn or the regulator needs changing?
I was thinking of getting the regulator and brush parts before removing the altenator but I don't know where to get them from do you have a supplier?
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8119
Are the D3 and D4 the same alternator?It can when others can't,
It will when others won't,
It goes where others don't.
14th Jan 2018 10:15 am
Leo Disco
Member Since: 22 Dec 2013
Location: Newcastle
Posts: 210
Yes interesting. I changed mine last weekend and now have a spare please take plenty pictures.
14th Jan 2018 10:18 am
garrycol
Member Since: 06 Dec 2010
Location: Canberra
Posts: 1115
I changed my alternator yesterday - it was not generating below 2000rpm and barely above 2000RPM. So I have my old unit that can probably be reconditioned - where do I find this Bodsy guide?
Thanks
Garry
14th Jan 2018 10:47 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
hi
just found this , done by flack , for the Denso alternator diode pack replacement
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4405
Started to do the job, but came to a stop when I tried to take the pulley off. I don't have to take it off to do the diode pack, but I really want to get a look at the bearings, before I seal it up again. I borrowed a pulley removal kit which has every conceivable type of socket in, except the one for the Land Rover alternator!
Will try again in the week. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
14th Jan 2018 8:32 pm
garrycol
Member Since: 06 Dec 2010
Location: Canberra
Posts: 1115
Stuart = thanks for the link
Garry
15th Jan 2018 1:49 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
Its an odd ball one on the Denso Alternator and make sure you undo it the right way or it will strip, they are very tight as well, once you get the pulley off, you will need a bearing puller as well.
I did'nt know Bodsy had done a Alternator guide??...
Flack
15th Jan 2018 9:39 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4405
Flack, my apologies
I found the Diode Replacement Guide on a Bodsy thread and I assumed!
You know what they say, Assumption makes an Ass out of U and Me!
Cheers,Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Jan 2018 11:18 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4405
Flack wrote:
Its an odd ball one on the Denso Alternator and make sure you undo it the right way or it will strip, they are very tight as well
I've got a 17AF driver to fit the pulley, but cant get a 10AF socket on the shaft at the same time? Would you just use the 17 and an impact gun? Standard thread I guess, anti-clockwise undo?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Jan 2018 11:25 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4405
Impact gun sorted it!
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Jan 2018 4:25 pm
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1422
Any link to where you got your rectifier from?
The place i got my last one from, the person has retired.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum