Rocky2397
Member Since: 10 Oct 2017
Location: Sheffield
Posts: 16
|
Fitting a parrot ck 3100 hands free |
|
Wandering if anyone could give a bit of advice,
Tried to fit the ck3100 parrot hand free to my disc,
I purchased a CT10LR01 wiring harness to fit the parrot, all fitted but the parrot would not work.
Tried fitting it in my work van (Citroen dispatch) this did not need the extra wiring harness and the parrot works fine,
Purchased another wiring harness retried and still won't power up,
Is there something I am missing
(Parrot also worked fine in my last car)
Cheers Chris
|
13th Feb 2018 4:43 pm |
|
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10641
|
The disco does not have an ignition wire on the wiring loom.
If you trace the red and yellow wires on the CT10LR01 loom, when plugged into the disco, you will find one of them has no connection on the disco. This ignition wire needs connecting to the back of the cigar lighter/power sockets green wire.
|
13th Feb 2018 7:11 pm |
|
|
Rocky2397
Member Since: 10 Oct 2017
Location: Sheffield
Posts: 16
|
Thanks for that info (Pete K)
Will check it out tomorrow
|
13th Feb 2018 7:53 pm |
|
|
Rocky2397
Member Since: 10 Oct 2017
Location: Sheffield
Posts: 16
|
Cheers Pete K
Now got it working
Again thanks for advice.
|
14th Feb 2018 5:14 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10641
|
no problem.
was it red or yellow that needed connecting ?
|
14th Feb 2018 7:19 pm |
|
|
Rocky2397
Member Since: 10 Oct 2017
Location: Sheffield
Posts: 16
|
Was the red cable, mate
|
15th Feb 2018 8:30 am |
|
|