Kelman70
Member Since: 10 Aug 2018
Location: Peterhead Aberdeenshire
Posts: 146
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Bonatti Grey 2006 Discovery 3 TDV6 HSE Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
replacing rear brake pipes from front to rear (body on) |
|
Hi folks,
MOT day is looming and just getting after all the jobs that require done
one of which are the rear brake lines, these have been chopped and joined in the centre previously but are suffering heavy corrosion where they drop down between the exhaust and passenger front wheel arch.
My intention is to cut and join just above where the pipes drop down next to the Air con Pipes, but looking at the drawing on advanced factors website it looks like there is a potential joining point slightly higher up.
Is there anyway to access this area without removing the body? it would seem these pipes would be up behind the engine but difficult to see/trace them.
Any help or advice is greatly appreciated
martin
|
2nd Dec 2021 10:04 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 SE Auto Zambezi Silver 2005 Discovery 3 TDV6 SE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
No you cant get to the joiner with the body on. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
3rd Dec 2021 7:27 am |
|
|