Member Since: 29 Oct 2014
Location: Sydney
Posts: 17
Ignition key backlight
Hi,
I have Disco 3 2007, bought it with 150K, is there supposed to be a light around the ignition key, to illuminate the key slot when doors are opened?
If so, how, is it hard to get to it, worth the trouble?
Thanks
Gab[/i]
7th Jan 2015 8:07 am
millsd3
Member Since: 13 Jan 2014
Location: Essex
Posts: 31
Hi - mine has an illuminated ring (green) that comes on with the courtesy lights. Had to check as I couldn't remember
I'm afraid I can't help with a fix but I'm sure someone will soon.
Dave
7th Jan 2015 4:39 pm
Dickydisco
Member Since: 03 Feb 2009
Location: Colchester
Posts: 501
Don't have a fix for this but my ignition glow ring doesn't work either. I'd like to know if it's a simple fix or part of the ignition barrel.
ThanksCurrent: D3 commercial
Past: but not forgotten D3 HSE x2, 5 TD5 disco2's, 1 200tdi disco1, 2 300tdi disco1 one of which was a commercial, Off roader with a rather large spec, ARB's and big travel suspension to name a few.
Pajero SWB 2.8 for off road playdays
http://www.youtube.com/watch?v=yYBx3SCl8vs check this for laughs
7th Jan 2015 6:08 pm
fino
Member Since: 28 Feb 2014
Location: Middlesex/ Surrey
Posts: 163
Don't if its because of HSE spec?
But I only noticed the light around the ignition key area on, if I set the courtesy lights in automatic mode. I normally switch the courtesy light mode off. Hold the middle button top by windscreen (you known where I mean) until it flashes twice to enable or disable.
7th Jan 2015 7:28 pm
Nodge68
Member Since: 05 Sep 2014
Location: Newquay
Posts: 1014
I can't imagine the key light bulb is difficult to change. It's a 5 minute job on most other LR/ Rover vehicles.
There's nothing cleaver about the light as it's simply fed by the interior light circuit. If the interior lighting is off, so will the key light. Freelander SE 2005 Auto.
D3 TDV6. Gone.
7th Jan 2015 8:23 pm
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
Does anyone know what bulb is required to make my ring glow
And how difficult it is
Andy
16th Oct 2015 5:20 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Dead easy - undue torx screws that hold on the plastic shroud, disconnect dead illuminated ring, remove and replace with new one.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 24 Nov 2010
Location: South Wales
Posts: 483
Hi Andy.
I took my ignition ring apart & replaced the bulb.
I cannot remember where I got the bulb from. It was a tiny little fella.
You'll need a soldering iron to replace it.
I may have some more of them at home. I will have a look tonight.Mitsubishi Outlander Phev 4H 2018.
Mitsubishi Outlander Phev 4H 2015 - gone.
Discovery 4 HSE - gone.
Discovery 3 S - gone.
Discovery 3 - gone.
Discovery 1 - gone.
Defender 90 300TDI - gone.
Defender 90 200TDI - gone.
Landrover 90 19J - gone.
Argocat 8x8 - gone.
Argocat 6x6 - gone
RR/LR V8 Hybrid 100" - gone.
Rangerover Classic 3.5 - gone.
Series III 2.25- gone.
Series IIa 3.0V6- gone.
Series I - 80" gone.
16th Oct 2015 8:47 am
anjo14
Member Since: 27 Apr 2012
Location: Lanarkshire
Posts: 562
If you have your interior light set for not to come on when opening the door then the ignition key ring light will not illuminate.D3 TDV6 S MY2005
16th Oct 2015 9:29 am
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
Ok so it's not a standard bulb replacement job. Understand now. Thanks.
If you do find a bulb let me know if you wish to sell, or what type it is please.
16th Oct 2015 1:42 pm
BAZ8046
Member Since: 26 Feb 2010
Location: Chatham
Posts: 278
Hi, I replaced mine recently, it's really easy to do. The bulb is a T5 286 cap less bulb in green and are only cheap. As Robbie says just drop the lower cowl and disconnect and remove the unit. You then need to split the unit by releasing the tabs. Once you have done this you will see the bulb. It is recessed in the unit but there is a tiny hole behind the bulb you can use to push it out. The new bulb then just pushes in. Hope this helps.D4 2016 Landmark, Waitomo Grey.
D3 2005 HSE, Bonatti Grey, now sold but still comes back for servicing.
Defender 2002 Td5 Commercial, had a hard life but slowly being restored.
I only work so I can afford to repair my Land Rovers!
16th Oct 2015 11:04 pm
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum