Member Since: 06 Dec 2017
Location: Caerphilly
Posts: 238
High Lift vs Exhaust Jack for lifting
Being a former Defender owner I am a big High Lift fan - jacking points everywhere! However, in the absence of suitable jacking points on D3 where you could use a High Lift I'm thinking of switching to an Exhaust Jack.
I have zero experience of using one of these at all. Does anyone else use one and if so in your opinion is it a decent replacement for a high lift off road.
I'd be really keen to hear your replies inc what model you have, how much clearance it gives and how quick it is to inflate and how reliable once inflate.
Thanks.
10th Dec 2017 12:40 pm
johnlad
Member Since: 02 Dec 2016
Location: blackpool
Posts: 408
I use an exhaust jack when off roading with my defender but I use it from my air compressor, far safer than a high lift but takes up a lot of room,
10th Dec 2017 1:18 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
I do the same.DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
10th Dec 2017 3:08 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73079
And me too.
10th Dec 2017 3:16 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Got an air jack, but never had to use it.. touch wood
10th Dec 2017 3:19 pm
abermarc
Member Since: 06 Dec 2017
Location: Caerphilly
Posts: 238
Looks like air jack way forward then.
How long does it take to fill from a compressor? I guess you mean a t-max type single or double cylinder one is it?
10th Dec 2017 3:38 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73079
About 3 or 4 mins from my Viar, but if you're using it in anger then you're not in a rush. As with all things, practise makes perfect. Better to find the best place for it (front and rear) on the drive rather than up to your knees in mud when it's sheeting it down and blowing a hoolie. Used mine many times, if anything other than very quick wheel off/wheel on then axle stand(s) are a must. And don't forget the park brake.
Mine to the left of the Duratracs:
Click image to enlarge
And in use, though I now put it further under but at the right balance point it can lift the whole side of the car:
Click image to enlarge
10th Dec 2017 3:43 pm
johnlad
Member Since: 02 Dec 2016
Location: blackpool
Posts: 408
I use mine with the compressor that works my locking diffs, takes around 2 mins to lift the car
10th Dec 2017 4:18 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
My single Tmax takes similar time to DSL.DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
10th Dec 2017 4:50 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1282
I carry both. Use the Hi Lift to change wheels, and exhaust jack where the Hi Lift is not practical.
10th Dec 2017 4:57 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26772
Funniest thing I ever saw.
Morocco 2010, In the dunes near Erg Chebbi. Defender rolled a tyre off the rim, and needed jacking. In the soft sand, an air jack was the only option.
Jack was placed and engine started. Operative (AlexE on here) proceeded to hold the pipe into the the Defender exhaust.
It was a hot day, and we were struggling on a side slope. Alex lost his footing as the car was about halfway up. He let go of the pipe and got a face full of soot! Proper black and white minstrel effect
Wish I'd had my camera!!
10th Dec 2017 5:06 pm
abermarc
Member Since: 06 Dec 2017
Location: Caerphilly
Posts: 238
John P
How do you use a high lift on a d3 to change wheels. Which jacking points are suitable for a high lift??Cogito ergo sum!
Disco 3 - Daisy - Ultimate combo of beast mode and comfort!
Defender 90 - Ruby - RIP
Disco 1 - Lilly - Tame!
Disco 1 - Truck with no name - Beast!
Disco 1 - Bertie - Beast!
Sankey 'twintub' DIY Camper Conversion
South African Multii-Trail Custom Overland Trailer
21st Dec 2017 10:09 pm
John P
Member Since: 12 Aug 2011
Location: West Sussex
Posts: 1282
I use a lift mate, like this - https://www.devon4x4.com/lift-mate.html and chock the wishbone with blocks of wood I carry. This keeps the car very level, which can be safer.
I also have a homemade attachment to lift on the rock sliders if I have to.
I also carry a X-Jack, which I'll use in certain conditions. It depends on the situation I'm in, as how to jack the car up safely.
I don't really like jacking on the chassis/rock sliders, as you have to raise the car quite high thereby changing the centre of gravity, for the wheels to get off the ground. It really depends on the situation you are in, as it's not always practical to get the car to level ground before you can change a wheel.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
