sturgessrick
Member Since: 23 May 2011
Location: Northamptonshire
Posts: 178
|
Reversing Camera Activation |
|
Hi All,
I have added a reversing camera today but for the life of me can't get it to display correctly. All I get is a short of an image but it's half on the screen and isn't right at all!!
I have turn on "park camera" with my iid tool. When I put it in reverse I do get the back screen come up. Do I need to enable anything else?
Thanks Rick
|
8th Oct 2017 1:41 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Did you fit a "ntsc " or "pal " camera ? G4 Gone ...but not forgotten
|
8th Oct 2017 3:56 pm |
|
|
sturgessrick
Member Since: 23 May 2011
Location: Northamptonshire
Posts: 178
|
I says it compatible for both formats.
|
8th Oct 2017 3:59 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6235
|
Make sure you have the wires connecting the screen the right way round..
Flack
|
8th Oct 2017 6:14 pm |
|
|
sturgessrick
Member Since: 23 May 2011
Location: Northamptonshire
Posts: 178
|
2 signal 5 ground. But I did sell just in case I read it wrong.
|
8th Oct 2017 6:21 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
If you've activated it and you're sure there's no ground issue, then it may be the camera. Whilst they say compatible for ntsc and pal, some definitely aren't, so another camera may be all you need. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
11th Oct 2017 4:32 pm |
|
|
Smarty167
Member Since: 15 Feb 2016
Location: Aberdeen
Posts: 6
|
Don’t suppose anyone has a link to a camera preferably one that shows the tow hitch and that can be connected to pins 5 and 2 with out the need for any additional electronics on a D4 sat nav.
|
4th Nov 2017 6:39 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12720
|
+1 for that. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
4th Nov 2017 8:34 pm |
|
|
sturgessrick
Member Since: 23 May 2011
Location: Northamptonshire
Posts: 178
|
I'm afraid o enable revering camera you do Ned to edit the cf so an iid tool or similar will be required. Loads of cameras on eBay that were I got min from £10 for. Kit.
|
4th Nov 2017 10:24 pm |
|
|
diverdello
Member Since: 05 Dec 2017
Location: Poole
Posts: 4
|
Can anyone help?
I have fitted a genuine reversing camera to my 64 plate D4 Commercial with touch screen sat Nav.
Do I need to buy the following module for it to work?
LANDROVER TV MODULE LR029273
Many thanks for your help.
Chris
|
5th Dec 2017 8:28 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
No G4 Gone ...but not forgotten
|
5th Dec 2017 8:33 am |
|
|
sturgessrick
Member Since: 23 May 2011
Location: Northamptonshire
Posts: 178
|
Re: Reversing Camera Help? |
|
diverdello wrote:Can anyone help?
I have fitted a genuine reversing camera to my 64 plate D4 Commercial with touch screen sat Nav.
Do I need to buy the following module for it to work?
LANDROVER TV MODULE LR029273
Many thanks for your help.
Chris
Nope you just need to plug the camera directly into the back of the screen. Then have the cff activated. Search it on here there is a full installation guide
|
5th Dec 2017 1:35 pm |
|
|
diverdello
Member Since: 05 Dec 2017
Location: Poole
Posts: 4
|
Great many thanks.
|
5th Dec 2017 4:01 pm |
|
|