Member Since: 06 Nov 2005
Location: Sunny Sussex
Posts: 81
Fault code issue.
Hi all, finally purchased the GAP IID tool and ran the scan 🙄 numerous faults found but only two that won’t clear.
B1311-96 (2F) Clock module - Component failure - internal failure
U2101-00 (2F) control module configuration incompatible.
It appears the second fault is quite common with no real explanations found.
I can’t seem to find any info on the first fault. Any help greatly appreciated 👍😊
Cheers D4 3.0 HSE cameras,Hybrid TV, 20" alloys, heated wheel, privacy, Tow pack.
Departed RRS TDV8 HSE Full Arden kit in TEAL and colour coded everything.
Departed Disco 3 2.7 HSE
I never drive faster than I can see!
17th Nov 2017 12:05 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73085
Does the clock work?
17th Nov 2017 12:07 pm
Canburne
Member Since: 15 Jan 2013
Location: Devon
Posts: 2036
O f course it does - it is always spot on at least twice a day .
"the inherent vice of capitalism is the unequal sharing of blessings....the inherent vice of socialism is the equal sharing of miseries" Winston Churchill
2016 D4 Landmark Club Waitomo ...or is it Club Tempest????
2015 D4 HSE Aintree Green
17th Nov 2017 12:40 pm
W6CJW
Member Since: 06 Nov 2005
Location: Sunny Sussex
Posts: 81
Yup clock works perfectly 😏D4 3.0 HSE cameras,Hybrid TV, 20" alloys, heated wheel, privacy, Tow pack.
Departed RRS TDV8 HSE Full Arden kit in TEAL and colour coded everything.
Departed Disco 3 2.7 HSE
I never drive faster than I can see!
17th Nov 2017 5:30 pm
Pedros
Member Since: 25 Jun 2011
Location: Cumbria
Posts: 454
Does it refer to the clock on the dashboard or the clock spring? I dunno....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
