E4ordy
Member Since: 10 Nov 2017
Location: Barnsley
Posts: 5
|
Hi everyone, just got my Discovery 3 last month and found this site due to sticker in back window, as the weather turned cold I though id check FBH, I could smell the paraffin smell when I got out but wanted to see smoke, I decided to pull the fuse and do the reset and after first start up the smoke was there, however since then I hasn't worked. does anyone in Barnsley area have the cable and computer to check it, or can shed any light, Thanks Elliot
|
 4th Dec 2017 7:51 am |
|
|
disco4ever
Member Since: 23 Dec 2013
Location: under the car
Posts: 404
  
|
I am not sure a hard reset would help getting rid of any FBH faults.
Check if power comes to the FBH? Achim
own garage certified LR tech
Disco 2 TD5 MY 2001 - gone but still driven by another owner
Defender 110 TD5 driving me bananas with all faults
Disco 3 TDV 6 HSE MY 2005 gone @280.000 km
Disco 4 SDV 6 HSE MY 2012
|
| 4th Dec 2017 8:45 am |
|
|
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
|
It's worth noting that pulling that fuse is not a guaranteed reset. Has never worked on my D3's I have to use a code reader.
|
| 4th Dec 2017 8:46 am |
|
|
E4ordy
Member Since: 10 Nov 2017
Location: Barnsley
Posts: 5
|
ok, as I say it was working before I did reset, I get no faults but only using a crappy Bluetooth obd2 reader, is there anyone near Sheffield/Barnsley who could help
|
| 4th Dec 2017 8:48 am |
|
|
