Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Webasto Fuel Burning Heater

FBH test query
Post Reply  Down to end
Page 1 of 1
jasonhb
 


Member Since: 17 May 2014
Location: Leamington Spa
Posts: 71

England 2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3
FBH test query

Hi All

Don’t think my FBH is working, it has been freezing a few mornings this week, plenty of diesel but no smell, no smoke, nothing.

Is there any way that I can test it or confirm whether it is working or not?

As an aside, read the wiki about it and mine also appears to have the red wire - not sure what this will do for me but thought I’d mention it.

Thanks in advance.

Jason
 '05 D3 TDV6 HSE Zambezi Silver
Blanked EGR's
Goodyear Duratracs
Long list of upgrades and mods to come 
 
Post #18775259th Nov 2017 1:43 pm
View user's profile Send private message View poster's gallery Reply with quote
badgerade
 


Member Since: 31 Jul 2010
Location: Berkshire
Posts: 287

United Kingdom 2006 Discovery 3 TDV6 GS Manual Zambezi SilverDiscovery 3

Easiest way to check it's actually doing anything is to start the car and open the bonnet.. you'll hear/feel the pump working away. You can also feel warm air coming out of the FBH exhaust under the car at the front.

I think the cheapest way to diagnose is to buy the lead from the forum shop https://www.disco3.co.uk/shop/fbh-diagnost...v-p66.html a usb to OBD lead from ebay, and then install the Webasto software onto a laptop. (Unless you've got an iid or something similar)
  
Post #18775459th Nov 2017 2:53 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 14177

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

hi

there is a reset and how to diagnose from robbies excellent write up

FBH should come on below 7c

think the red wire was fitted on earlier D3 when connnecting a controller

https://www.disco3.co.uk/wiki/Fuel_Burning_Heater#Resetting
   
Post #18775469th Nov 2017 2:57 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 14177

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

badgerade wrote:
Easiest way to check it's actually doing anything is to start the car and open the bonnet.. you'll hear/feel the pump working away. You can also feel warm air coming out of the FBH exhaust under the car at the front.

I think the cheapest way to diagnose is to buy the lead from the forum shop https://www.disco3.co.uk/shop/fbh-diagnost...v-p66.html a usb to OBD lead from ebay, and then install the Webasto software onto a laptop. (Unless you've got an iid or something similar)


beat me to it Whistle
   
Post #18775489th Nov 2017 2:58 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site