Member Since: 04 Aug 2015
Location: Internet
Posts: 270
Rear prop removal
Im replacing the rear prop but the collar has stayed onto the transfer box when removing old shaft. How do ye get this off?
29th Sep 2017 7:14 pm
sputnixb51
Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833
Give it a wack with a nylon or rubber hammer
29th Sep 2017 7:27 pm
Irwin
Member Since: 04 Aug 2015
Location: Internet
Posts: 270
I gave it a few wacks already with a steel claw hammer but no go so I stopped just in case.
29th Sep 2017 7:42 pm
sputnixb51
Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833
Steel on steel not good use a block of wood if you only have a steel hammer rotate it and hit it on opposite sides once you have movement pop it off with a screwdriver
29th Sep 2017 8:53 pm
Irwin
Member Since: 04 Aug 2015
Location: Internet
Posts: 270
It popped off with a nylon hammer New shaft is on and hopefully good for another 10 years
29th Sep 2017 10:50 pm
sputnixb51
Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833
not long since I put a metal monster junk refurbished one on my 56 plate seems to be holding well but now got the dreaded judder so will be coming off again to swap the box and torque con. Also put one I refurbished myself onto my commercial ready for Mot which it passed just this week it will be interesting to see how that goes ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum