rainman
Member Since: 16 Feb 2017
Location: Finland
Posts: 1
![](templates/vbnew/images/spacer.gif)
|
Fault code 0x22 on Termo top V |
|
Hi,
I currently have the fault code 0x22 (Reference resistance wrong) on my webasto and don't know what to do next, but first I need to explain the whole story. It started with the fault code 0x05 (Flame was detected prior to combustion) that occurred now and then and finally turned it into a locked state. I took it apart and saw a crack in the ceramic part where the injector is. It worked for a couple of weeks after I had it opened, then it went to a locked state again. I ordered the whole webasto burner kit spare part and replaced it, since the ceramic part is not available separately.
This is when I started to get the error code 0x22 instead, the kit included a new glow plug. I replaced it with my old one but still get the same error. I also measured the resistance when cold and that seems to be in order for both of the glow plugs.
Any ideas about what it can be?
Dan
|
6th Apr 2017 8:51 am |
|
|
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
![](templates/vbnew/images/spacer.gif)
|
Where did you order the burner from?
I'm getting the flame detected prior to combustion error too.
|
24th Sep 2017 7:23 pm |
|
|