Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
Webasto MultiControl
Hello,
this is my first post so dont hate me.
Anyway there are instructions how to add Webasto 1533 timer to Land Rover Discovery 3 FBH.
So I went to the local Webasto dealer and they said that the new Multicontrol supports Thermo top V.
Inside the box was a brochure were Thermo top V was listed.
To the problem now.
MultiControl has four wires.
Black - analog
Red- Power 12v
Brown- Earth
Yellow- W-Bus
so I connected yellow to pin 2, red and black to battery then the webasto timer booted up, I selected TT-VEVO because on the brochure it says Thermo Top V = TT-VEVO
After the handbrake light turned off I pushed the webasto burn button but I got an error (no w-bus signal)
Side note, all the doors are closed and bonnet hooks are pressed in.
5th Dec 2016 2:01 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Red and black to battery or red and brown?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
5th Dec 2016 2:29 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
I would say,
Red battery pos.
Brown battery neg.
Black 12volt trigger signal in, ie from headlamps or some other remote kit gsm etc
Yellow as you have connected it to the fbh.
5th Dec 2016 3:13 pm
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
sorry I meant brown
5th Dec 2016 3:14 pm
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
lynalldiscovery wrote:
I would say,
Red battery pos.
Brown battery neg.
Black 12volt trigger signal in, ie from headlamps or some other remote kit gsm etc
Yellow as you have connected it to the fbh.
Here is the wiring
5th Dec 2016 3:17 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Black is probably 12V switched OUTPUT, rather than INPUT. I assume this a replacement for the 1533 Oval timer, it certainly uses the same 4 pin square connector.
Edit: confirmed by pic above, I started this post before it was posted
MAYBE the address the Multi Controller uses over WBUS to command the FBH is one of those blocked by the D3 variant FBH (the D4's FBH doesn't reject the same address).
Can you try it on a D4?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Last edited by Martin on 5th Dec 2016 3:44 pm. Edited 1 time in total
5th Dec 2016 3:19 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
What other options are available when you selected "TT-VEVO"?
The manual PDF I can find doesn't give any of the available settings.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
5th Dec 2016 3:27 pm
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
Yeah, I think it is a replacment for the 1533 oval timer + 7 day programming which is why I bought it in the first place.
Unfortunately I dont own a LR4 nor have any buddys that own it.
But here is the picture to select what webasto heater you have.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Dec 2016 4:01 pm
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
I haven't spoken to the dealer yet.
Maybe I have done something wrong?
Where is the bonnet sensor?
In the hooks right?
Because if I read the webasto OBD troubleshooting aka no connection to w-bus, the problem seems to be that the car isn't in sleep
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Dec 2016 7:23 pm
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
When I check the log it still gives the w-bus error
Edit:
Quote:
MAYBE the address the Multi Controller uses over WBUS to command the FBH is one of those blocked by the D3 variant FBH (the D4's FBH doesn't reject the same address).
but then why on the sheet it says Thermo Top V is Supported?
Edit 2: I gave up.
Tested it again. Checked all the wiring.
Clock was 19:05 aka 7:05pm and scheduled the timer to start at 20:05 aka 8:05pm. Locked the doors, went inside and when I came back and again the w-bus connection error.
Going to replace it with the 1533 oval timer. Wish me luck.
6th Dec 2016 12:58 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Not all TTV heaters are the same. The D3 version rejects commands from the Telestart remote control unit. The D4 version doesn't.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
7th Dec 2016 12:00 am
etnies858
Member Since: 07 Sep 2016
Location: Tartu
Posts: 19
Okey, maybe thats why no one has installed multicontrol to disco 3
7th Dec 2016 10:44 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
They are also pretty new06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
