Viking Steve
Member Since: 24 May 2016
Location: Solihull
Posts: 16
|
Clutch Problems After Brake Pipe Replacement at Dealer |
|
Hi all, hoping someone can help with a recent issue with the Disco 3.
I'm having problems with my clutch since LR Team valley replaced my rear brake pipe. It was sitting low when it came back but over the past few days it has sunk lower and today it is practically on the floor making gear changes a nightmare. There does not seem to be any obvious leaks in the footwell and the clutch isn't slipping or giving off any burning smells.
I need to check the fluid level tomorrow morning, hopefully from what i've read it is possible that the brake fluid was topped up to the full mark which is actually lower than the clutch infill - is that right? If so, how would I go about bleeding the clutch. I've done brakes before but never a clutch.
Failing that, anything else I should be checking?
I'm hoping that it is nothing serious, last time i went to LRTV for a bush replacement - the crossover pipe went a week later. This time, a brake pipe replacement and now clutch problems!
No more small jobs going their way if this carries on
|
22nd Aug 2017 9:58 pm |
|
|