eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
|
help needed with rear door latch |
|
morning I have a failing n/s rear door lock on my d3 it locks/unlocks but needs a bit of help either with the handle (pulling several times) or the remote (again plipping several times) so it looks like its on the way out
now the problem I have is that I've removed the door panel as a precaution whilst I can still get the door open but I cant figure out how I will get the door open if the lock fails whilst shut before I can replace the unit any advise greatly welcomed, have read all the threads regarding this but cant seem to find a answer
lastly have looked on the web for a replacement unit there seems to be lots of part numbers that all seem to fit with vastly varying prices anyone replaced there lock on a 6A chassis 55 plate d3 that could recommend a supplier thanks for any help please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
7th Apr 2019 10:20 am |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
I got mine from Dan at Duckworths
If you know its going why are you prolonging the agony, just replace it
|
7th Apr 2019 10:35 am |
|
|
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
|
thanks for your reply,im not prolonging the replacement just found out this morning its failing and cant get one till next week or fit till next week please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
7th Apr 2019 10:47 am |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
There is a write up on how to refurb rather than replace
I replaced the rear nearside lock but then after replacing it refurbed the old one for future use
https://www.disco3.co.uk/forum/door-lock-m...+door+lock
|
7th Apr 2019 10:51 am |
|
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
Some price increase in a couple of years
I paid £81.95 in November 2016 for LR091361
|
7th Apr 2019 10:57 am |
|
|