Member Since: 08 Oct 2010
Location: Alberton
Posts: 246
SUSPENSION OPERATING VALVES
Hi Guys, On a recent trip to UK I bought all three control valves for my D3. On starting the replacement job back here in SA I found that the pipe entry sockets were different to the existing ones on my 2006 V8. The new sockets are like small white plastic cups. Do I just push pipes into these fittings or am I short of some parts that are required to make these fittings complete and seal??
Any help much appreciated.Life always good with a Landy
2006 LR DISCO 3 4.4 V8 HSE
DISCO 1 2.8 TDi
DISCO11 TD5
RR CLASSIC 1980 3.5 V8
6th Aug 2017 9:50 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13629
hi
they are called voss connectors , if u unscrew them u will see the white plastic bit holds the fitting together , i.e. keeps the olive in place and stops any junk going into the new valve
put the nut onto the pipe then the olive , don't need the white bit
included a pic, u can see the white bit is removed when fitting the plastic pipe
hope that helps
gary
6th Aug 2017 9:54 am
SADISCOBOB
Member Since: 08 Oct 2010
Location: Alberton
Posts: 246
Thanks Gary, feel a little stupid but didn't want to start "fiddling" with the new gear "blind". I serviced the front valve block three years ago and it has lasted quite well. The manual states that they cannot be serviced but are quite straightforward and a good clean out and some O ring grease works wonders. Now done 165 000 Klm so thought the 'old girl' deserved a new set.
Thanks again.Life always good with a Landy
2006 LR DISCO 3 4.4 V8 HSE
DISCO 1 2.8 TDi
DISCO11 TD5
RR CLASSIC 1980 3.5 V8
6th Aug 2017 10:23 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13629
hi
don't worry i also thought the same at first
replaced the front and reservoir valve on mine, just got the rear one to do
also fitted a new air tank and compressor
did fit pushfit fittings in place of the voss connectors on the valves, air tank and compressor , found them easier than the voss connectors
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum