Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D4)

D4 drivers side second row seat belt
Post Reply  Down to end
Page 1 of 1
Gordietbh
 


Member Since: 05 Jan 2013
Location: Notts
Posts: 32

D4 drivers side second row seat belt

Does anyone happen to know or have a picture of the rear inertia reel from the offside second row seat belt?

I've taken the trim panel off to fit a seatbelt but the DAB module seems to be in the way of where I think it should go. I realise I could take this bracket off but I cannot see it fitting back with the inertia reel in place.

I just wanted to make sure i'm trying to fit the reel to the correct place in the photo below? - Any guidance appreciated.

Click image to enlarge
  
Post #18429841st Aug 2017 2:51 pm
View user's profile Send private message View poster's gallery Reply with quote
chugga90
 


Member Since: 13 Aug 2014
Location: Buckinghamshire
Posts: 433

United Kingdom 2013 Discovery 4 3.0 TDV6 Commercial Auto Indus SilverDiscovery 4

Yes it does go down behind there. Presume you are changing a commercial to having seats.
Looks impossible when first looking in, but when all the technical stuff is unbolted and on one side all becomes clear and obvious!
 Discovery commercial tdv6 auto 2013
Volkswagen t6 lwb Kombi dsg 4motion 2018
Volkswagen t5.1 lwb single cab tipper 2013
Discovery commercial sdv6 auto 2014 gone and not really missed.
Range Rover Tdv8 gone
Freelander 2 I6 very sadly gone
VW t5 Dsg gone and missed 
 
Post #18430051st Aug 2017 4:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Gordietbh
 


Member Since: 05 Jan 2013
Location: Notts
Posts: 32


Yes I'm fitting an Atlantech conversion in for a holiday then taking it all back out again Rolling Eyes

My question is does the inertia reel bolt directly to the hole arrowed in the photo or is it further down at the bottom of the cut out?

Many thanks for the response.
  
Post #18430161st Aug 2017 4:21 pm
View user's profile Send private message View poster's gallery Reply with quote
chugga90
 


Member Since: 13 Aug 2014
Location: Buckinghamshire
Posts: 433

United Kingdom 2013 Discovery 4 3.0 TDV6 Commercial Auto Indus SilverDiscovery 4

The roller part of the belt goes into the cavity between the skin arrowed and the outside of the car.
I only did it a month ago, but cannot recall if its that hole or there is a lower one.
It is very obvious when the stuffs out the way and you have the belt to slot in.
Sorry its not more helpful!
 Discovery commercial tdv6 auto 2013
Volkswagen t6 lwb Kombi dsg 4motion 2018
Volkswagen t5.1 lwb single cab tipper 2013
Discovery commercial sdv6 auto 2014 gone and not really missed.
Range Rover Tdv8 gone
Freelander 2 I6 very sadly gone
VW t5 Dsg gone and missed 
 
Post #18430681st Aug 2017 5:50 pm
View user's profile Send private message View poster's gallery Reply with quote
Gordietbh
 


Member Since: 05 Jan 2013
Location: Notts
Posts: 32


No that's very helpful, sounds like I've fitted the nearside one incorrectly as I've bolted it to the outside of the skin at the top so I need to remove it all anyway....safety first Laughing
  
Post #18430701st Aug 2017 5:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Gordietbh
 


Member Since: 05 Jan 2013
Location: Notts
Posts: 32


All sorted, as you say obvious when you see it Very Happy
  
Post #18432992nd Aug 2017 1:05 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site