Member Since: 11 Feb 2017
Location: Warwickshire
Posts: 147
Front height sensor
How do I change the front suspension height sensor. I have one faulty on the N/S.
Thanks
24th Jun 2017 10:53 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Disconnect the connector, undo the two screws, pop off the rubber height rod, replace.
Then will probably need a height calibration. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Jun 2017 9:18 am
muzzy2007
Member Since: 11 Feb 2017
Location: Warwickshire
Posts: 147
Thanks for that do you need to disconnect the battery at all. Where or how do you re calibrate
26th Jun 2017 9:21 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
I'd remove the suspension fuse so it doesn't self level. And remove the wheel of course so you can get to it.
Calibration needs an IID tool or similar.Bodsys Brake Bible
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum