Member Since: 28 May 2017
Location: wolverhampton
Posts: 6
lights on dash
Report post
hi all i have a disco 3 2007 (57) auto done 86000 and have all lights lit up on dash, when bought the car it had a new electric handbrake which the garage did when we had it and there was a suspension fault light apear, have been working away so car was left for 2 months when took in for mot when i was back it failed due to front suspension arm bush, front passenger wheel bearing has exessive play and inner front constant velocity joint gaiter is damaged so i took it to a mechanic i use on other cars he said he did arms and but later fount out he hadent also he changed the front passenger wheel bearing i took it away and 2 mins down the road lights lit up on dash with exlimation mark messages saying hdc fault suspension lowered and a grinding which happens for 2/3 secs then goes have taken into diognostics and faults came up that the compresser voltage was on 5 volts and 2 egr.valves were faulty, no mention of hdc or any thing, also the height sensor is faulty can anyone help many thanks
21st Jun 2017 3:43 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
If you had lower arms replaced, it must have a proper 4 wheel alignment followed by recalibration of the steering angle sensor otherwise, you get all the bells and whistles you're currently experiencing. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
21st Jun 2017 3:52 pm
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
If the car has not been used for 2 months , what is the state of the battery? Low voltage will cause many unexplained warning issues
21st Jun 2017 4:09 pm
joseph961@live.co.uk
Member Since: 28 May 2017
Location: wolverhampton
Posts: 6
it was the front suspension arm on the front passenger side that needind doing but it wassnt done for what ever reason and the car started strait away, the light apeared after mechanie had replaced hub/bearing on front passtenger side
21st Jun 2017 8:05 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13629
hi
wonder as the compressor isn't running if he's disturbed one of the 3 x terminal connectors that sit behind front passenger side wheel arch liner
know ref the garage saying the compressor only has 5 volts when it should have 12 volts
just a thought if one of the wires have been pulled out and just need repairing , as one of these connectors go to the compressor
21st Jun 2017 8:16 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13629
hope the owner of the pics didn't mind me using them
these are the connectors and what can happen
21st Jun 2017 8:20 pm
joseph961@live.co.uk
Member Since: 28 May 2017
Location: wolverhampton
Posts: 6
i will have to speak to the garage i belive this is what happended as no lights were on before it went apart from the suspension light which i think is the height sensor, he did say the volts from compressor were too high or low cant remember exactly
21st Jun 2017 8:24 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13629
my thinking is at least it won't hurt for him to check the wiring out first
to then ensure the correct voltages are going to the compressor
is only the case of removing the front wheel then taking out the inner wheel arch to access them
plse let us know how u get on
21st Jun 2017 8:35 pm
joseph961@live.co.uk
Member Since: 28 May 2017
Location: wolverhampton
Posts: 6
have just spoken to garage and they said all 4 brakeing wire sensors have been cut and joined up ?
22nd Jun 2017 11:06 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20727
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20727
joseph961@live.co.uk wrote:
it was the front suspension arm on the front passenger side that needind doing but it wassnt done for what ever reason and the car started strait away, the light apeared after mechanie had replaced hub/bearing on front passtenger side
Missed this. Would be checking they have not damaged the wheel speed sensor, or CV joint My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum