Member Since: 21 Oct 2016
Location: kent
Posts: 13576
suspension arrow
hi guys
apologies asking , done a search but can't find what i'm looking for
fault is the arrow will stay illuminated on the instrument panel, in access and off road height
in normal height the arrow doesn't appear , which i think is normal
when i put it into access or off road height , it will adjust to the height, compressor will run for a little while then compressor will turn off , with the usual hiss
but the arrow will not go away
is a new battery, new compressor, new reservoir tank and reservoir valve, new front valve
steering angle is zero
double checked tyre pressures , front 33 psi, rear 40 psi
done the height calibration and all of them are within 5mm
what do u think plse guys, what am i missing , apart from a brain that is
17th Jun 2017 9:19 am
Down&Dirty
Member Since: 17 Aug 2012
Location: Somewhere out back
Posts: 1287
Think you'll find if in any other mode than standard height the arrow will stay lit to show that's it's in either access of or off road height MY24 Defender 90 X-Dynamic HSE
MY18 Disco 5 HSE Santorini Black Now Gone.
17th Jun 2017 10:43 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10336
I'm not sure what the lowline instrument panel is like, but on mine there is always a icon visable showing that it is in access or off road to warn things aren't in "normal"
I don't think you have a problem
17th Jun 2017 4:05 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13576
Down&Dirty wrote:
Think you'll find if in any other mode than standard height the arrow will stay lit to show that's it's in either access of or off road height
many thks, happy days then
appreciate the reply
Last edited by gstuart on 17th Jun 2017 4:41 pm. Edited 1 time in total
17th Jun 2017 4:38 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13576
Pete K wrote:
I'm not sure what the lowline instrument panel is like, but on mine there is always a icon visable showing that it is in access or off road to warn things aren't in "normal"
I don't think you have a problem
hi pete
sounds like a result , the arrow is shown in between the speedo and rev counter
how's ur disco going by the way, hope all is well
thks again
17th Jun 2017 4:41 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13576
regarding valve blocks
i've done myself a drawing and was wondering if anyone has some pics of their valve blocks please, mainly to compare the coloured bands that are on the pipes and that all the connections are correct
would be extremely helpful plse and thks as always in advance
18th Jun 2017 9:01 am
BrettKaz
Member Since: 11 Nov 2013
Location: Canberra
Posts: 209
Gary here are the photos you were after - may have another chance to get some more if you need - PM me.
Valve block front - behind bumper (remove front RHS wheel arch liner)
Click image to enlarge
Rear valve Block - in front of rear (pass side) strut
Click image to enlarge
Click image to enlarge
Centre (main) - next to (forward of) compressor
Click image to enlarge
18th Jul 2017 8:04 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13576
ur a true gent, thks and bless u kind sir
pm sent
20th Jul 2017 8:25 am
BrettKaz
Member Since: 11 Nov 2013
Location: Canberra
Posts: 209
Click image to enlarge
Expansion tank
20th Jul 2017 12:08 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13576
perfect
thks for taking the time posting the pics , can see now where that gremlin wiring loom goes
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum