Davilu
Member Since: 10 Nov 2013
Location: South East
Posts: 12
  
|
| D4 Reversing Camera and FBH Receiver Removal |
|
Time to trade in my beloved D4 so I'm going to remove a couple of bits that I added on when I first purchased the D4.
Reversing Camera - I kept the original parts including the wiring loom section when I originally installed the camera. Once removed and the original bits re-installed will I need to get it de-activated using an IID/Nanocom or will the car recognise that the camera isn't there and revert back to original factory settings?
FBH Receiver - as above, once removed will it need to be de-activated using an IID/Nanocom tool?
Any advice gratefully received!
|
 10th May 2017 4:50 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
If you remove the camera without deactivating it, you'll find the screen goes black.
Remote for the FBH, just unplug it and remove it from the frame mount. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 11th May 2017 12:09 am |
|
|
Davilu
Member Since: 10 Nov 2013
Location: South East
Posts: 12
|
Thanks for your reply. I will arrange for the car to be reset so that the parking sensors graphic is re-activated after the removal of the camera.
|
| 11th May 2017 12:23 am |
|
|
