Member Since: 03 Feb 2022
Location: Northern Ireland
Posts: 1
New defender wheels
Hi All
These look to be on but not sure about the offset. Would these work with a disco 3?
19'' GENUINE LAND ROVER DEFENDER 6010 NEW 6 DOUBLE SPOKE ALLOY WHEELS ALLOYS 5X120
5X120 FITMENT
8.5J ET41.5
TYRES - 255/65/19
Thanks!
Andy
29th Jul 2022 12:39 pm
pwheeldon
Member Since: 15 Jan 2020
Location: West Yorks
Posts: 1462
Hi, I've seen a few people have fitted the steel wheels so I'd assume the alloys would fit too.Discovery 4 GS 2009 Auto Stornoway Grey
Discovery 3 s 2005 Auto Bonatti Grey Gone
Discovery 3 SE 2005 Manual Zambezi Silver Gone
Range Rover Sport HSE 2006 Black
Aston Martin DB7 VV
29th Jul 2022 1:05 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15257
You would also need to check the load rating as I'm sure the Disco will be a heavier beast than the new Defender....... always on the road less travelled 🚧
29th Jul 2022 2:23 pm
BlackShama
Member Since: 19 Sep 2022
Location: UK
Posts: 19
Have these on my D3. Load rating is fine as you can spec these on the new 130, which supports a higher gross weight than the Disco. Kerb weight averages 30kg more per corner on the D3 (don't know the exact per axle split) but the tyres specced on the 130 have a higher load index than those on a stock D3, so the rims must be able to match that specification.
I will reach out to LR and see if they’ll provide the spec but like I said, sold fitted to a new 130 with a 3380kg gross weight limit so should be absolutely fine
Last edited by BlackShama on 3rd Oct 2022 11:32 am. Edited 2 times in total
3rd Oct 2022 9:00 am
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4208
I have a set being dropped off to me by a friend later today, the only difference is the tyre size (265/65/19 as opposed to 255/55/19 fitted as standard gives about 8.7% increase in diameter to 32.6 from 30 inches - must remember to change this with the IID) although it still fits fine with no rubbing, works out cheaper than buying a new set of tyres for my 18's !I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
3rd Oct 2022 10:51 am
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23606
The deeper sidewall looks great. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
3rd Oct 2022 10:58 am
BlackShama
Member Since: 19 Sep 2022
Location: UK
Posts: 19
nigethecat wrote:
I have a set being dropped off to me by a friend later today, the only difference is the tyre size (265/65/19 as opposed to 255/55/19 fitted as standard gives about 8.7% increase in diameter to 32.6 from 30 inches - must remember to change this with the IID) although it still fits fine with no rubbing, works out cheaper than buying a new set of tyres for my 18's !
I have 255/65 which fit fine. Looking at swapping to the 255/65 Wranglers as I think a more agressive tread in 265/65 will start to rub as the clearance is already small.
The additional 14mm or so offset from the Defender wheels really helps avoid rubbing so maybe with a 0.5"-1" lift via GAP Tool you could comfortably fit 265/65 MTs.
Response on load rating
So the answer I got is that the wheels are rated to the vehicle weight they are optioned for and don't have a published load rating. Looking at the stock tyre load index for a 110 or 130, we have 114 XL with aftermarket tyres recommended to be 116. Minimum recommended for a Disco 3 is 111, so that data combined with the higher published gross max weight of the 130 on these rims makes me confident they are safe to use.
Last edited by BlackShama on 3rd Oct 2022 3:38 pm. Edited 1 time in total
3rd Oct 2022 11:03 am
BlackShama
Member Since: 19 Sep 2022
Location: UK
Posts: 19
LT wrote:
The deeper sidewall looks great.
Currently sitting in access mode whilst I replace the front end, can't wait to finally roll it out of the garage, fit some ATs and raise the suspension back up to see how it really looks
3rd Oct 2022 11:34 am
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15257
Load rating is generally printed (embossed) on the rear of LR wheels....... always on the road less travelled 🚧
3rd Oct 2022 12:13 pm
BlackShama
Member Since: 19 Sep 2022
Location: UK
Posts: 19
On this style apparently it's not - or I'm going blind. Can't find a single number that references load index or rating. The rims I pulled off do have it but nothing on the new ones. I would have thought it would be legally required?
3rd Oct 2022 3:05 pm
BlackShama
Member Since: 19 Sep 2022
Location: UK
Posts: 19
Clearer photos of 19” wheels from OP. This is factory off-road height. 32.1” tyres.
9th Oct 2022 1:12 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum