UffBrock
Member Since: 18 Mar 2011
Location: Oxfordshire
Posts: 157
  
|
| Lost nipple - D4 Rear Light Assembly |
|
Whilst replacing a bulb I noticed that the nipple on the end of one of the two locator pegs on my rear light assembly was missing – presumably snapped off at some stage. The rest of the peg is intact.
The fitting is still held in place by the two screws and the other complete locator peg but I wondered if anyone had any ideas for a repair to the broken peg.
|
 13th Jan 2016 2:18 pm |
|
|
Rob.M
Member Since: 09 May 2016
Location: Warrington
Posts: 85
 
|
Big bump for this, i've got a snapped peg for my rear light.
Anyone know the part number or where i could get one?
Thanks
|
| 30th Mar 2017 7:23 am |
|
|
muzzy2007
Member Since: 11 Feb 2017
Location: Warwickshire
Posts: 147
|
Im in the same boat with no nipples at all  but seriously I removed my lights last week and both snapped off.I have used some glue to re-attach the nips which is holding until I need to change a bulb.
Im not sure if an engineering company could copy said nipples so you could tap a 5 or 6mm thread into it,
just an 
Dave
|
| 30th Apr 2017 3:13 pm |
|
|
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
|
I can't imagine that any such spare part is available. On the plus side, availability of used, or sourced from Veleo, tail lamps on eBay and Amazon is excellent and if it's the original D3 lamps that you need, there are used ones aplenty 
|
| 30th Apr 2017 3:21 pm |
|
|
